Marko Bek (Author), Joris Betjes (Author), Bernd Steffen von Bernstorff (Author), Igor Emri (Author)

Abstract

This paper presents the analysis of pressure dependence of three thermoplastic polyurethane (TPU) materials on vibration isolation. The three TPU Elastollan materials are 1190A, 1175A, and 1195D. The aim of this investigation was to analyze how much the performance of isolation can be enhanced using patented Dissipative bulk and granular systems technology . The technology uses granular polymeric materials to enhance materials properties (without changing its chemical or molecular composition) by exposing them to "self-pressurization," which shifts material energy absorption maxima toward lower frequencies, to match the excitation frequency of dynamic loading to which a mechanical system is exposed. Relaxation experiments on materials were performed at different iso- baric and isothermal states to construct mastercurves, the time-temperature-pressure interrelation was modeled using the Fillers-Moonan-Tschoegl model. Dynamic material functions, related to isolation stiffness and energy absorption, were determined with the Schwarzl approximation. An increase in stiffness and energy absorption at selected hydrostatic pressure, compared to its stiffness and energy absorption at ambient conditions, is represented with K_k(p, [omega]), defining the increase in stiffness and K_d (p, [omega]), defining the increase in energy absorption. The study showed that close to the glassy state, moduli of 1190A and 1195D are about 6-9 times higher compared to 1175A, whereas their properties at ambient conditions are, for all practical purposes, the same. TPU 1190A turns out to be most sen- sitive to pressure: at 300 MPa its properties are shifted for 5.5 decades, while for 1195D and 1175A this shift is only 3.5 and 1.5 decades, respectively. In conclusion, the stiffness and energy absorption of isolation may be increased with pressure for about 100 times for 1190A and 1195D and for about 10 times for 1175A. Published by AIP Publishing.

Keywords

vibration isolators;viscoelasticity;hydrostatics;polymers;continuum mechanics;

Data

Language: English
Year of publishing:
Typology: 1.01 - Original Scientific Article
Organization: UL FS - Faculty of Mechanical Engineering
UDC: 539.3:678(045)
COBISS: 15825947 Link will open in a new window
ISSN: 1070-6631
Views: 914
Downloads: 589
Average score: 0 (0 votes)
Metadata: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Other data

Secondary language: Slovenian
Secondary keywords: izolatorji vibracij;viskoelastičnost;hidrostatičnost;polimeri;mehanika kontinuuma;
Type (COBISS): Not categorized
Pages: str. 1-18
Volume: ǂVol. ǂ29
Issue: ǂiss. ǂ12
Chronology: dec. 2017
DOI: 10.1063/1.5000413
ID: 10915226
Recommended works:
, zapiski predavanj
, magistrsko delo magistrskega študijskega programa II. stopnje Strojništvo