Abstract
In this paper, we show how the slide-to-roll ratio (SRR), the contact kinematics and the surface energy all have important effects on the elastohydrodynamic friction. As reported previously, diamond-like-carbon (DLC) contacts of the type DLC/DLC provide the lowest coefficient of friction, in particular those DLC materials with the lowest surface energies (three different DLC coatings were used in this study). A friction reduction of up to 48 %, compared to a steel/steel contact, was obtained. A surprising new finding from this investigation is that the friction in DLC contacts is significantly reduced for high SRRs, i.e. a difference of up to 27 % was measured in the DLC/DLC contacts when the SRR increased from 0.5 (rolling prevails) to 1.8 (sliding prevails). However, even more surprising is the effect of the SRR on the friction in mixed steel/DLC contacts, which is related to the contact design and its kinematics. We found that if the DLC is coated on the slower surface, a high SRR will not reduce the friction to any significant extent, typically about 5 %, and at most 13 %, compared to steel/steel contacts. However, a significant friction reduction is observed when applying a low-surface-energy DLC coating to the faster surface-on average about 20 % and as high as 33 %. In this case (a high SRR and DLC on the faster surface), mixed steel/DLC surfaces can experience a very similar friction as that seen for DLC/DLC contacts. Qualitatively, the same behaviour was found for both positive and negative SRR values.
Keywords
EHD lubrication;DLC;surface energy;wetting;slide-to-roll ratio;
Data
Language: |
English |
Year of publishing: |
2015 |
Typology: |
1.01 - Original Scientific Article |
Organization: |
UL FS - Faculty of Mechanical Engineering |
UDC: |
539.92(045) |
COBISS: |
14197019
|
ISSN: |
1023-8883 |
Views: |
1596 |
Downloads: |
826 |
Average score: |
0 (0 votes) |
Metadata: |
|
Other data
Secondary language: |
Slovenian |
Secondary keywords: |
tribologija;mazanje;DLC prevleke; |
Type (COBISS): |
Article |
Embargo end date (OpenAIRE): |
2016-09-09 |
Pages: |
str. 1-10 |
Volume: |
ǂVol. ǂ60 |
Issue: |
ǂiss. ǂ1 |
Chronology: |
Oct. 2015 |
DOI: |
10.1007/s11249-015-0593-3 |
ID: |
11053093 |