[master thesis]
Žiga Časar (Author), Matjaž Hriberšek (Mentor), Matej Zadravec (Co-mentor)

Abstract

Lyophilization or freeze-drying is a widely used process in the pharmaceutical and food industry. In the process the solvent will be removed under extreme conditions of low temperature and low system pressures, whereby sublimation happens, the transition from the solid phase to the gas phase, with skipping the liquid phase, which happens bellow the triple point. This study focuses on numerical modeling at the start of the process, the so called primary drying. For this stage the highest mass flow rates of vapor are typical, since the driving force of the process is the pressure difference between the sublimation front and surrounding area. In this stage the non-bonded solvent is removed. Because of the extreme conditions the typical computational fluid dynamics approach is not suitable anymore and has to be corrected. One way to do this is to use additional models for fluid behavior at the solid wall. The study focuses on the influence of different boundary conditions on the solid wall, No-Slip, Free Slip and Maxwell Slip, and their effect on fluid flow inside the vial. A quantitative and qualitative comparison of the results is presented.

Keywords

lyophilization;Knudsen number;computational fluid dynamics;fluid flow;numerical modeling;slip boundary condition;

Data

Language: English
Year of publishing:
Typology: 2.09 - Master's Thesis
Organization: UM FS - Faculty of Mechanical Engineering
Publisher: [Ž. Časar]
UDC: 004.414.23:57.086.13(043.2)
COBISS: 22769686 Link will open in a new window
Views: 911
Downloads: 147
Average score: 0 (0 votes)
Metadata: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Other data

Secondary language: Slovenian
Secondary title: Numerična analiza tokovnih razmer v viali
Secondary abstract: Izdelki v farmacevtski in prehrambni industriji so zaradi svoje kemijske sestave pogosto občutljivi na visoke temperature, zaradi česar je potrebno z njimi ravnati drugače, kot z običajnimi materiali. V primeru kadar je potrebno izdelke sušiti, torej odstraniti topilo iz že obstoječe zmesi, se posega po procesu liofilizacije. Liofilizacija je proces odstranjevanja topila iz zamrznjene zmesi, pri čemer pride do faznega prehoda iz trdnine v plin (sublimacija), kar pa je mogoče izvesti pri zelo nizkih temperaturah in obratovalnih tlakih. Gonilna sila procesa je tlačna razlika med uparjalno fronto in okolico. Nanjo vplivajo predvsem tokovne razmere v okolici, geometrija in prenos toplote znotraj liofilizatorja. Z dobrim poznavanjem vseh dejavnikov je mogoče proces dodatno optimirati in s tem zagotoviti željen rezultat.
Secondary keywords: liofilizacija;Knudsenovo število;računalniška dinamika tekočin;tokovne razmere;numerično modeliranje;robni pogoj zdrsa;magistrske naloge;
URN: URN:SI:UM:
Type (COBISS): Master's thesis/paper
Thesis comment: Univ. v Mariboru, Fak. za strojništvo, Energetsko, procesno in okoljsko strojništvo
Pages: VIII, 34 str.
ID: 11162442
Recommended works:
, diplomsko delo univerzitetnega študijskega programa
, diplomsko delo univerzitetnega študijskega programa