zaključna naloga Razvojno raziskovalnega programa I. stopnje Strojništvo
Matej Strašek (Author), Marko Nagode (Mentor), Jernej Klemenc (Co-mentor)

Abstract

Zaključna naloga obravnava vpliv poroznosti na življenjsko dobo delov iz aluminija. V nalogi kot material, ki ga preučujemo, uporabimo AlSi7Cu0.5Mg-T6. V prvem delu naloge pregledamo Murakami in El Haddad model določitev trajne dinamične trdnosti, ki ju uporabimo v numerični analizi. Nato pregledamo rezultate fizičnega Wöhlerjevega testa. V drugem delu naloge izvedemo simulacijo preizkusa dinamične trdnosti z uporabo lokalnih materialnih lastnosti in preizkušancu določimo Wöhlerjevo krivuljo. Ugotoviti želimo vpliv lokalnih materialnih lastnosti in primerjati ustreznost modela določitve trajne dinamične trdnosti.

Keywords

diplomske naloge;poroznost;aluminij;trajna dinamična trdnost;metoda končnih elementov;

Data

Language: Slovenian
Year of publishing:
Typology: 2.11 - Undergraduate Thesis
Organization: UL FS - Faculty of Mechanical Engineering
Publisher: [M. Strašek]
UDC: 539.217:669.71:519.61(043.2)
COBISS: 28914435 Link will open in a new window
Views: 759
Downloads: 154
Average score: 0 (0 votes)
Metadata: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Other data

Secondary language: English
Secondary title: Porosity effect on fatigue life of aluminium parts
Secondary abstract: In this thesis, the influence of the porosity on the fatigue life of aluminum parts is analyzed. AlSi7Cu0.5Mg-T6 is used as the studying material in the paper. In the first part, the Murakami and El Haddad model are reviewed. Then, the results of the physical Wöhler test are examined. In the second part of the task, a simulation of fatigue life using local material properties is performed and the Wöhler curve is determined from it. The influence of local material properties is determined and the suitability of the models for determining fatigue life is analyzed.
Secondary keywords: thesis;porosity;aluminum;fatigue life;finite element analysis;
Type (COBISS): Final paper
Study programme: 0
Thesis comment: Univ. v Ljubljani, Fak. za strojništvo
Pages: XIV, 19 f.
ID: 12029512
Recommended works:
, zaključna naloga Razvojno raziskovalnega programa I. stopnje Strojništvo
, diplomsko delo univerzitetnega študijskega programa