magistrsko delo magistrskega študijskega programa II. stopnje Strojništvo
Matija Kurinčič (Author), Davorin Kramar (Mentor)

Abstract

Magistrsko delo je bilo narejeno z namenom izboljšanja procesa ultrazvočnega varjenja bakrenih priključkov. Med postopkom varjenja se zaradi vibracij na določenih delih varjenca pojavijo razpoke. Varjeni spoj se testira z vlečno silo, zato je spoj obremenjen na luščenje. Kupec zahteva minimalno vlečno silo 214 N za porušitev zvara in varjenec brez pojava razpok. Optimizacija procesa je bila izvedena s pomočjo uporabe načrtovanja eksperimentov. Slednji so bili osredotočeni na vpliv procesnih parametrov varilnika na mehansko trdnost zvara in pojav razpok. Predeksperiment je pokazal najvplivnejše parametre. Sprememba parametrov le delno izboljša proces varjenja, zato so bile med eksperimenti izvedene oblikovne izboljšave ležišča in varjenca, ki dodatno pripomorejo k optimizaciji in doseganju ciljev. Dodatna eksperimenta izbranih glavnih parametrov dobita optimalne procesne parametre.

Keywords

magistrske naloge;metoda načrtovanja eksperimentov;ultrazvočno varjenje bakra;optimizacija procesa;mikrorazpoke;trgalni test;

Data

Language: Slovenian
Year of publishing:
Typology: 2.09 - Master's Thesis
Organization: UL FS - Faculty of Mechanical Engineering
Publisher: [M. Kurinčič]
UDC: 621.791:669.3(043.2)
COBISS: 78094083 Link will open in a new window
Views: 671
Downloads: 19
Average score: 0 (0 votes)
Metadata: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Other data

Secondary language: English
Secondary title: Process optimization of ultrasonic welding of copper connectors
Secondary abstract: The master's work has been done to improve the process of ultrasonic welding copper connections. During the welding process, cracks appear on certain parts of the workpiece due to vibrations. Welded joints must be tested by the pulling force, the joint is loaded to peel. The customer demands a minimum peel force of 214 N to break the weld and workpiece without crack. Process optimization was done with using the design of experiment method. The experiments focused on the influence of the welding process parameters on the mechanical strength of the weld and the appearance of cracks. Changing the parameters only partially improves the welding process, so during the experiments, design improvements of the welding template, anvil and the workpiece were made, which further help to optimize and achieve the goals. With additional experiments of the selected main parameters obtain the optimal process parameters.
Secondary keywords: master thesis;design of experiments;ultrasonic welding of copper;process optimization;micro-cracks;peel test;
Type (COBISS): Master's thesis/paper
Study programme: 0
Embargo end date (OpenAIRE): 2023-08-26
Thesis comment: Univ. Ljubljana, Fak. za strojništvo
Pages: XXV, 100 str.
ID: 13285837
Recommended works: