zaključna naloga Univerzitetnega študijskega programa I. stopnje Strojništvo - Razvojno raziskovalni program
Vid Lekše (Author), Damjan Klobčar (Mentor)

Abstract

V sklopu zaključne naloge smo raziskovali vpliv procesnih parametrov pri laserskem graviranju titanove zlitine Ti-6Al-4V. Raziskovali smo vpliv hitrosti graviranja, frekvence in električnega toka laserskega vira. Najprej smo v programski opremi definirali geometrijo površine vzorca in geometrijo osmih vzporednih linij, ki smo jih gravirali. V naslednjem koraku smo definirali procesne parametre laserskega graviranja. Vsakemu izmed treh vzorcev smo spreminjali samo določen parameter, ostali pa so bili konstantni. Po izvedenem laserskem graviranju smo vzorce opazovali z digitalnim optičnim mikroskopom in raziskovali vpliv laserskega graviranja na spremembe na površini gravure. Ugotovili smo, da procesni parametri močno vplivajo na videz in geometrijo graviranega vzorca na titanovi zlitini. S povečevanjem hitrosti graviranja se povečuje razdalja med kraterji, ki jih ustvari laserski žarek. Ugotovili smo tudi, da se s povečevanjem frekvence pulzov zmanjšuje razdalja med kraterji, kot tudi njihov premer in hrapavost površine. Pri povečevanju procesnega parametra električnega toka se je premer kraterjev povečeval, razdalja med njimi pa zmanjševala.

Keywords

diplomske naloge;lasersko graviranje;optična mikroskopija;Ti-6Al-4V;Nd:YAG;procesni parametri;

Data

Language: Slovenian
Year of publishing:
Typology: 2.11 - Undergraduate Thesis
Organization: UL FS - Faculty of Mechanical Engineering
Publisher: [V. Lekše]
UDC: 621.9.048.7:669.295(043.2)
COBISS: 83067139 Link will open in a new window
Views: 265
Downloads: 53
Average score: 0 (0 votes)
Metadata: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Other data

Secondary language: English
Secondary title: Influence of laser engraving of titanium alloy Ti-6Al-4V
Secondary abstract: As part of the final bachelor thesis, we investigated the influence of process parameters in laser engraving of titanium alloy Ti-6Al-4V. We investigated the influence of engraving speed, frequency and electric current of the laser source. With the help of applicable software we first defined the surface geometry of the sample and the geometry of the eight parallel lines. Next, process parameters of laser engraving were defined. We only changed a certain parameter for each of the three samples, and the others were constant. After the laser engraving was carried out, the samples were observed with a digital optical microscope and the influence of laser engraving on the changes on the engraving surface was investigated. We found that the process parameters strongly influence the appearance and geometry of the engraved pattern on the titanium alloy. As the engraving speed increased, the distance between the craters created by the laser beam increased too. We also found that as the pulse frequency increases, the distance between the craters decreases, as does their diameter and surface roughness. As the process parameter of the electric current increased, the diameter of the craters increased and the distance between them decreased.
Secondary keywords: thesis;laser engraving;optical microscopy;Ti-6Al-4V;Nd:YAG;process parameters;
Type (COBISS): Final paper
Study programme: 0
Embargo end date (OpenAIRE): 1970-01-01
Thesis comment: Univ. v Ljubljani, Fak. za strojništvo
Pages: XIV, 33 f.
ID: 13411362
Recommended works:
, zaključna naloga Univerzitetnega študijskega programa I. stopnje Strojništvo - Razvojno raziskovalni program
, zaključna naloga Univerzitetnega študijskega programa I. stopnje Strojništvo - Razvojno raziskovalni program
, zaključna naloga Razvojno raziskovalnega programa I. stopnje Strojništvo
, diplomsko delo Visokošolskega strokovnega študijskega programa I. stopnje Strojništvo
, magistrsko delo magistrskega študijskega programa II. stopnje Strojništvo