Analysis of floating objects based on non-intrusive measuring methods and machine learning

Mateja Škerjanec (Author), Klemen Kregar (Author), Gašper Štebe (Author), Gašper Rak (Author)

Abstract

Floating objects in rivers and streams present a growing problem, not only as they may cause clogging of bridges and other hydraulic structures, and consequently floods, but also because they can have a diverse impact on river (and marine) ecosystems, either positive (in case of in-channel wood) or negative (in case of anthropogenic floating objects). To automatically identify different types of floating objects (i.e., wood pieces, EPS and XPS boards, and plastic and metal containers) and their volumes in an open channel, we propose a novel methodology based on non-intrusive measuring methods and machine learning. To this end, we tested the combination of an industrial 2D laser scanner, a high-speed camera, and an ultrasonic sensor. In the laboratory experiment, 36 samples were scanned separately, two to three times in a row, resulting in 77 raw LIDAR clouds and image sequences. Raw data were post-processed with custom-developed algorithms to determine the volumes of samples above the water surface and their intensity histograms. The latter were analyzed with the machine learning algorithm to distinguish between different material types of floating objects. For each of them, the material density was assigned. Based on the identified floating object's material type, pre-assigned density, and measured volume above the water surface, the sample volumes were calculated and compared with the actual ones determined before setting up the experiment. The results show that the proposed approach enables material recognition with accuracy higher than 90%. The average volume calculation error based on detected material type, assigned densities, and measured floating object's volume above the water surface is approx. 2%. The proposed methodology proved promising for automatic differentiation between different types of floating objects and remote measurement of their volume. To use the method in real-world applications (e.g., on bridges) for forecasting downstream quantities of floating objects, and consequently adjusting their management accordingly, additional measurements are needed, focusing on simultaneous scanning of multiple floating objects, under different flow conditions.

Keywords

plavje;lasersko skeniranje;strojno učenje;meritve volumna;floating objects;laser scanning;machine learning;volume estimation;

Data

Language:	English
Year of publishing:	2022
Typology:	1.01 - Original Scientific Article
Organization:	UL FGG - Faculty of Civil and Geodetic Engineering
UDC:	626/627
COBISS:	105599235
ISSN:	0169-555X
Views:	79
Downloads:	32
Average score:	0 (0 votes)
Metadata:

Other data

Secondary language:	Slovenian
Secondary keywords:	plavje;lasersko skeniranje;strojno učenje;meritve volumna;
Type (COBISS):	Article
Pages:	[12] str.
Issue:	ǂVol. ǂ408, art. 108254
Chronology:	jul. 2022
DOI:	10.1016/j.geomorph.2022.108254
ID:	15504050