Mirko Kariž (Author), Milan Šernek (Author), Manja Kitek Kuzman (Author)

Abstract

Dodajalne tehnologije so v zadnjem desetletju dosegle velik razvoj na področju same tehnike kot tudi materialov za tiskanje. Poseben poudarek je na razvoju materialov, ki bi bili cenejši, iz naravnih virov, brez izpustov škodljivih snovi med postopkom izdelave, z možnostjo uporabe odpadnih surovin ter možnostjo reciklaže po odsluženju. Les oziroma lesni ostanki so ena od možnih surovin, ki bi lahko bile uporabljene za 3D-tiskanje v kombinaciji z naravnimi in sintetičnimi polimeri. Predvidevamo, da se bo v razvoju dodajalnih tehnologij z uporabo lesa širil tudi spekter njihove uporabe na gradbenem področju, recimo tudi pri gradnji montažnih hiš. Narejen je pregled objav na temo 3D-tiskanja v povezavi z naravnimi surovinami, s poudarkom na lesni masi ter postopkih, kjer je možna uporaba lesnih delcev

Keywords

les;3D-tiskanje;dodajalne tehnologije;lesni ostanki;lesno-plastični kompoziti;

Data

Language: Slovenian
Year of publishing:
Typology: 1.02 - Review Article
Organization: UL BF - Biotechnical Faculty
UDC: 655.3.066.51:676.15
COBISS: 2845833 Link will open in a new window
ISSN: 0024-1067
Views: 43
Downloads: 2
Average score: 0 (0 votes)
Metadata: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Other data

Secondary language: English
Secondary title: Possible uses of wood in additive technologies (3D printing)
Secondary abstract: Additive manufacturing technologies have developed greatly over the last decade in terms of technology and printing materials. Special emphasis is placed on the development of cheaper materials that are derived from natural sources, without the release of harmful substances during the manufacturing process, with the possibility of using waste materials and recycling after service life. Wood or wood residues are among the potential raw materials that could be used for 3D printing in combinations with natural and synthetic polymers. It is anticipated that, with the development of additive technologies, the use of wood will also expand to the area of structural elements, such as in the construction of prefabricated houses. A review of publications on the topic of 3D printing with natural raw materials with an emphasis on wood biomass and technologies, where the use of wood particles is possible, was made
Secondary keywords: wood;3D printing;additive technology;wood residues;wood-plastic composites;
Type (COBISS): Article
Pages: str. 71-84
Volume: ǂLetn. ǂ66
Issue: ǂšt. ǂ2
Chronology: 2017
DOI: 10.26614/les-wood.2017.v66n02a07
ID: 23403268