diplomsko delo
Peter Novak (Author), Andrej Žemva (Mentor)

Abstract

Diplomsko delo obravnava zasnovo in izdelavo elektronskega vezja za krmiljenje koračnega motorja. Opisani so vsi ključni postopki od izbire komponent do testiranja. V uvodnem delu je opisan princip delovanja elektro magnetov in kako nam koristijo pri elektro motorjih. Kasneje je razloženo delovanje koračnega motorja. Dotaknemo se tako rotorja kot statorja: njune notranje sestave, izgleda in medsebojnega delovanja. Nato so opisane glavne komponente, ki so uporabljene v vezju: H-mostič, LDO in N-mosfet. Za tem je razložen še avtomobilski standard AEC-Q. Sledi osrednji del, kjer je najprej predstavljena izbira glavnih komponent vezja glede na zahtevane pogoje in standarde. Potem je opisano delo v programu Altium Designer, kjer je najprej nastala shema in odtis nekaterih elementov. Sledil je izris sheme in končna izdelava zasnove vezja, ki je bilo nato naročeno pri proizvajalcih tiskanin. Nazadnje je predstavljeno še testiranje izdelanega vezja in odpravljanje napak ter zaključne ugotovitve in opažanja.

Keywords

koračni motor;gonilnik;AEC-Q standard;avtomobilska industrija;univerzitetni študij;Aplikativna elektrotehnika;diplomske naloge;

Data

Language: Slovenian
Year of publishing:
Typology: 2.11 - Undergraduate Thesis
Organization: UL FE - Faculty of Electrical Engineering
Publisher: [P. Novak]
UDC: 621.3(043.2)(0.034.2)
COBISS: 230023427 Link will open in a new window
Views: 191
Downloads: 451
Average score: 0 (0 votes)
Metadata: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Other data

Secondary language: English
Secondary title: Design and implementation of an electronic circuit for controlling a stepper motor
Secondary abstract: The thesis deals with the design and manufacture of an electronic circuit for controlling a stepper motor. All key procedures from component selection to testing are described. The introductory part describes the principle of operation of electromagnets and how they are used for electric motors. Later, the operation of a stepper motor is explained. We describe the rotor and the stator: their internal composition, appearance and interaction. Then the main components used in the circuit are described: H-bridge, LDO and N-mosfet. This is followed by an explanation of the automotive standard AEC-Q. The main part follows, where the selection of the main circuit components according to the required conditions and standards is first presented. Then the work in the Altium Designer program is described, where the schematic and the print of some elements were first created. This was followed by the drawing of the schematic and the final production of the circuit design, which was then ordered from printed circuit manufacturers. Finally, the testing of the manufactured circuit and troubleshooting are presented, as well as final findings and observations.
Secondary keywords: stepper motor;driver;AEC-Q standard;automotive industry;
Type (COBISS): Bachelor thesis/paper
Study programme: 1000315
Embargo end date (OpenAIRE): 1970-01-01
Thesis comment: Univ. v Ljubljani, Fak. za elektrotehniko
Pages: 1 spletni vir (1 datoteka PDF (33 str.))
ID: 25925393