Potresna analiza montažne armiranobetonske hale

diplomska naloga

Klemen Bajc (Author), Matjaž Dolšek (Mentor), Tomo Cerovšek (Thesis defence commission member), Anže Babič (Co-mentor)

Abstract

V okviru te diplomske naloge je bila izvedena potresna analiza montažne armiranobetonske hale. Največji poudarek je bil na preučevanju modeliranja betonskih polnil in njihovega vpliva na odziv konstrukcije med potresom. V nalogi so predstavljena pravila in računski postopki, ki so bili uporabljeni pri modeliranju konstrukcije. Vpliv polnil v poljih med stebri smo določili s poenostavljenim modelom, kjer se polnilo modelira z dvema diagonalama v ravnini zidu. Potresno analizo smo izvedli z metodo s horizontalnimi silami, ki je predvidena v Evrokodu 8. Za modeliranje smo uporabili program ETABS v9.7.4. Izdelana sta bila dva modela in sicer, model objekta z upoštevanjem polnil in model brez polnil, ki je služil za primerjavo rezultatov. Ugotovili smo, da so pomiki pri konstrukciji s polnili v povprečju manjši za 38%. Razlike smo opazili tudi pri notranjih statičnih količinah stebrov. Na mestu, kjer se na steber priključuje polnilo, katerega višina je precej manjša od višine etaže, se pojavi moment, ki je za 43 % večji od momenta pri čistem okvirju. Še večja razlika je v prečnih silah, saj so le-te tudi do petkrat večje od sil, ki smo jih določili na osnovi modela brez upoštevanja polnil.

Keywords

gradbeništvo;diplomska naloga;VSŠ;OG-MK;armiranobetonska montažna hala;betonska polnila;modeliranje polnil;metoda s horizontalnimi silami;Evrokod 8;

Data

Language:	Slovenian
Year of publishing:	2014
Typology:	2.11 - Undergraduate Thesis
Organization:	UL FGG - Faculty of Civil and Geodetic Engineering
Publisher:	[K. Bajc]
UDC:	624.042.7:624.012.45(043.2)
COBISS:	6812769
Views:	2810
Downloads:	738
Average score:	0 (0 votes)
Metadata:

Other data

Secondary language:	English
Secondary title:	Seismic analysis of precast reinforced concrete industrial building
Secondary abstract:	A seismic analysis of precast reinforced concrete building is presented in this graduation thesis. The main objective was to estimate the impact of concrete infills on seismic response of structure. In the first part of thesis the principles and analytical procedures for modelling of such structures are described. The effect of concrete infills was taken into account with a single-strut model. The modelling of structure and all the analysis were according to Eurocode 8 performed by software ETABS v9.7.4. For comparison, two different models were developed. The first one is a model which accounts for the effect of concrete infill, whereas the second model consisted of bare frame, which is often used in practice. It was found that infills reduced storey drift for approximately 38%. There are some differences in bending moments, too. In the case, where the infill which having the height much smaller than the height of column, connects to column, bending moments were observed for 43% greater in comparison to those based on the bare frame. However, much greater difference was observed for the shear forces in the columns, which were around five times greater than that observed in the case of bare frame.
Secondary keywords:	precast reinforced concrete frame;masonry infill;concrete brick infill modelling;lateral force method;Eurocode 8;
File type:	application/pdf
Type (COBISS):	Bachelor thesis/paper
Thesis comment:	Univ. v Ljubljani, Fak. za gradbeništvo in geodezijo
Pages:	X, 48 str., 1 pril.
ID:	8708230