poročilo o raziskavi
Sara Grahek (Avtor), Mojca Divjak (Recenzent), Andrijana Sever Škapin (Mentor)

Povzetek

Uvod: Pri izbiri materialov za izdelavo pripomočkov v ortotiki in protetiki je potrebno upoštevati nekatere njihove osnovne in predelovalne lastnosti. Lastnosti ortotičnih materialov, ki med drugim vplivata na kvaliteto pacientovega življenja, sta toplotna prevodnost in prepustnost za vodno paro. Namen: Namen diplomskega dela je izbrati nekaj najpogosteje uporabljenih materialov v ortotiki ter določiti razlike prepustnosti za vodno paro in razlike toplotne prevodnosti teh materialov. Metode dela: Določanje toplotne prevodnosti je bilo izvedeno po zahtevah SIST EN 12667:2002, prepustnost za vodno paro pa smo merili po SIST EN 7783:2012. Pri merjenju toplotne prevodnosti je bila uporabljena posebna naprava, izdelana iz dveh plošč z različnima temperaturama, med kateri je bil vstavljen vzorec materiala. Iz vrednosti, ki so bile izmerjene, smo na podlagi izračunov določili toplotno prevodnost materiala. Za merjenje prepustnosti za vodno paro smo uporabili merilne posodice. Hitrost prehajanja vodne pare smo določili gravimetrično, kot količino vodne pare, ki pri sobni temperaturi v časovni enoti preide iz merilne posodice z višjo relativno vlažnostjo prek vzorca v prostor z nižjo relativno vlago. S pomočjo izračunov smo dobili vrednosti prepustnosti za vodno paro za posamezen material. Rezultati: V poskusu so bili testirani različni ortotični materiali in sicer termoplastični polimeri: polietilen, polipropilen in njun kopolimer, penjena polimera s komercialnima imenoma Poliform in Plastozot, polimerni kompozit, ojačen z ogljikovimi vlakni in usnje. Najnižje vrednosti toplotne prevodnosti so bile izmerjene pri penjenih polimernih materialih, sledilo je usnje, najvišje vrednosti pa so bile izmerjene pri termoplastičnih materialih. Največja prepustnost za vodno paro je bila izmerjena pri usnju, sledita mu penjena polimera, najnižje vrednosti prepustnosti za vodno paro pa imajo termoplastični materiali in kompoziti. Razprava in sklep: Rezultati so pokazali, da imajo različni ortotični materiali različne vrednosti toplotne prevodnosti in prepustnosti za vodno paro, poznavanje teh lastnosti pa je bistveno za izbiro ustreznega ortotičnega materiala za posamezno uporabo. Nepravilna izbira lahko negativno vpliva na pacientovo kožo in udobje pri nošenju pripomočka. Da bi prišli do podrobnejših rezultatov, bi bilo potrebno v proces meritev vključiti tudi paciente.

Ključne besede

diplomska dela;ortotika in protetika;ortoze;termoplasti;kompoziti;usnje;toplotna prevodnost;prepustnost za vodno paro;

Podatki

Jezik: Slovenski jezik
Leto izida:
Tipologija: 2.11 - Diplomsko delo
Organizacija: UL ZF - Zdravstvena fakulteta
Založnik: [S. Grahek]
UDK: 617.3
COBISS: 5302123 Povezava se bo odprla v novem oknu
Št. ogledov: 2937
Št. prenosov: 1045
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Angleški jezik
Sekundarni naslov: Thermal conductivity and water vapur transmission of orthotics materials
Sekundarni povzetek: Introduction: When selecting materials for the manufacture of devices used in orthotics and prosthetics, it is necessary to consider some of their basic properties and processing. The properties of orthotic materials, among other things, affect the quality of the patient's life, the thermal conductivity and the permeability to water vapour. Purpose: The purpose of this thesis is to choose some of the most common materials used in orthotics and determine the differences in terms of permeability to water vapour and the thermal conductivity of these materials. Methods: The thermal conductivity was determined in accordance with the requirements of EN 12667: 2002, while the water vapour’s permeability was measured according to DIN EN 7783:2012. For measuring the thermal conductivity a special device was used, made from two sheets at different temperatures, between which the sample material was inserted. From the measured values, the heat conductivity of the material was calculated. For measuring the permeability with respect to water vapour a measuring cup was used. The speed of migration of the water vapour was determined gravimetrically, while the amount of water vapour at room temperature was measured per unit time passing from the measuring cup with a higher relative humidity through the sample into a space with a lower relative humidity. Based on calculations we obtained the values of the permeability to water vapour for a particular material. Results: During the experiments we tested different orthotic materials, i.e., the thermoplastic polymers: polyethylene, polypropylene and their copolymers, foamed polymers with the commercial names Poliform and Plastozot, polymer composites, reinforced with carbon fibres and leather. The lowest values of the thermal conductivity were measured in the foamed plastic materials, followed by leather; the highest values were measured in the thermoplastic material. The maximum permeability to water vapour was measured in the leather, followed by the polymer foam. The minimum values of the permeability to water vapour were observed for thermoplastic materials and composites. Discussion and conclusions: The results show that the selected orthotic materials had different values of thermal conductivity and permeability to water vapour. An understanding of these properties is essential for selecting the appropriate orthotic materials for a particular application. The wrong choice may adversely affect the patient's skin and comfort while wearing the device. To determine the impact of the use of these materials and consequently their properties on the skin and the patient's well being, it would be necessary to include a study involving patients.
Sekundarne ključne besede: diploma theses;orthotics and prosthetics;orthoses;thermoplastic polymers;composites;leather;thermal conductivity;water vapour permeability;
Vrsta dela (COBISS): Diplomsko delo/naloga
Študijski program: 0
Komentar na gradivo: Dipl. delo (bolonjski študij), Univ. v Ljubljani, Zdravstvena fak., Oddelek za protetiko
Strani: 34 str.
ID: 10909436