magistrsko delo
Filip Franc (Avtor), Matjaž Dolšek (Mentor), Jože Lopatič (Član komisije za zagovor), Drago Saje (Član komisije za zagovor), Tomaž Hozjan (Član komisije za zagovor), Mirko Kosič (Komentor)

Povzetek

V magistrski nalogi projektiramo nosilno konstrukcijo 8-etažne stanovanjske stavbe, ki se nahaja v mestu Bitola v Republiki Makedoniji. Nosilna konstrukcija stavbe je zasnovana kot armiranobetonski prostorski mešani sistem, sestavljen iz sten in okvirov. Zaradi neustrezne zasnove se izkaže, da je stavba torzijsko podajna. Geometrijo stavbe povzamemo po obstoječi zasnovi, ki je bila projektirana v skladu z JUS standardom. Nato stavbo analiziramo in projektiramo po standardu Evrokod. V študijah uporabimo programa Etabs in SAP2000. Pri projektiranju se osredotočimo na potresno analizo in na dimenzioniranje tipičnega okvira ter glavnih nosilnih sten. Poleg tega izvedemo tudi analizo in dimenzioniranje najbolj obremenjene medetažne plošče. Za izbrane konstrukcijske elemente izdelamo tudi armaturne načrte. Zaradi velike projektne potresne sile, ki je predpisana za torzijsko podajen sistem, in nizkega procenta sten glede na zasnovo objekta (0,2 % do 0,3 % tlorisa etaže), je delež armature v glavnih nosilnih stenah relativno visok. Za izvedbo ekonomičnejše nosilne konstrukcije (manjša poraba materiala) bi bilo treba obstoječo zasnovo spremeniti tako, da stavba ne bi bila več torzijsko podajna. Na ta način bi potresno obnašanje stavbe bistveno izboljšali, kar bi dovoljevalo projektiranje na manjšo potresno silo. Če smo spreminjali le dimenzije posameznih elementov, potresnega obnašanja stavbe ni bilo mogoče bistveno izboljšati, kar nakazuje, da je smiselno vidike potresno odporne gradnje upoštevati že v najzgodnejših fazah zasnove stavb.

Ključne besede

gradbeništvo;magistrska dela;armiran beton;potresna analiza;globalna duktilnost;torzijska podajnost stavbe;ovojnica upogibnih momentov;

Podatki

Jezik: Slovenski jezik
Leto izida:
Tipologija: 2.09 - Magistrsko delo
Organizacija: UL FGG - Fakulteta za gradbeništvo in geodezijo
Založnik: [F. Franc]
UDK: 624.012.45:728.222(497.784)(043.3)
COBISS: 8462433 Povezava se bo odprla v novem oknu
Št. ogledov: 1412
Št. prenosov: 778
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Angleški jezik
Sekundarni naslov: Design of a reinforced concrete residential building in Bitola
Sekundarni povzetek: In the Master thesis the design of the structure of an 8-storey residential building, which is located in the city of Bitola in the Republic of Macedonia, is presented. The structural system of the building is designed as a reinforced concrete (RC) dual system, composed of frames and walls. Due to insufficient conceptual design, the structural system should be considered as torisionally flexible. However, the initial geometry of the building was adopted in accordance to an existing conceptual design, which was performed according to JUS code. In the thesis, the building was designed in accordance to the Eurocode standard. The analyses of the structure were performed using the computer programs Etabs and SAP2000. Particular attention was devoted to seismic analysis of the building, and to the design of a typical frame, main walls and the most loaded slab. For the structural elements under consideration, reinforcement drawings were also created. The results of the analyses indicated relatively large reinforcement ratios in the walls. This can be attributed to large design base shear, which is prescribed for a torsionally flexible system, and the low percentage of walls compared to the area of a plan of the building. A more economical design could be achieved only by changing the conceptual design in order to transform the building to a torsional stiff building. As a consequence, the larger value of the behaviour factor could be taken into account. Considering only minimal changes in the sizes of structural elements, the seismic performance of the building could not be significantly improved, which highlights the importance of adequate consideration of the basic principles of conceptual design in early stages of the design.
Sekundarne ključne besede: civil engineering;masterʼs thesis;reinforced concrete;seismic analysis;capacity design;torsionally flexible building;envelope of the bending moment;
Vrsta dela (COBISS): Magistrsko delo/naloga
Študijski program: 0
Konec prepovedi (OpenAIRE): 1970-01-01
Komentar na gradivo: Univ. v Ljubljani, Fak. za gradbeništvo in geodezijo
Strani: XIX, 130 str., 9 pril.
ID: 10937959