magistrsko delo
Martin Štrumbelj (Avtor), Bojan Žlender (Mentor), Primož Jelušič (Komentor)

Povzetek

Magistrsko delo obravnava parametrično analizo voziščne konstrukcije z numerično metodo - metodo končnih elementov. Delo je sestavljeno iz petih delov, in sicer je v samem začetku dela teoretični del, kjer je na kratko opisana zgodovina in prihodnost voziščne konstrukcije ter splošen opis voziščne konstrukcije sedanjosti. V nadaljevanju je predstavljeno dimenzioniranje voziščne konstrukcije po tehničnih specifikacijah za ceste - TSC. Našteti in opisani so vsi pogoji, priporočila ter zahteve, ki jih mora načrtovalec oz. projektant upoštevati pri načrtovanju in dimenzioniranju voziščne konstrukcije. Po teoretičnem delu sledi praktičen primer dimenzioniranja voziščne konstrukcije po TSC (empirični postopek dimenzioniranja voziščne konstrukcije), kjer obravnamo realen primer odseka ceste v občini Starše. V zadnjem delu je podana parametrična analiza voziščne konstrukcije, izvedene z metodo končnih elementov (MKE), sledi zaključek. Na podlagi parametrične analize smo prikazali vpliv dimenzij in lastnosti vgrajenih materialov ter nosilnost podlage na trajnost voziščnih konstrukcij. Rezultate analitične metode smo primerjali s tehničnimi specifikacijami za ceste. Pri analitični metodi smo uporabljali programsko orodje Everstress.

Ključne besede

gradbeništvo;voziščna konstrukcija;metoda končnih elementov;tehnične specifikacije za ceste;TSC;analitična metoda;empirični postopek;magistrske naloge;

Podatki

Jezik: Slovenski jezik
Leto izida:
Tipologija: 2.09 - Magistrsko delo
Organizacija: UM FGPA - Fakulteta za gradbeništvo, prometno inženirstvo in arhitekturo
Založnik: [M. Štrumbelj]
UDK: [624.131:625.72]:519.6(043.2)
COBISS: 21987587 Povezava se bo odprla v novem oknu
Št. ogledov: 626
Št. prenosov: 82
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Angleški jezik
Sekundarni naslov: Parametric analysis of the road structure by finite element method
Sekundarni povzetek: The master’s thesis discusses parametric analysis of the roadway structure by numerical method – the finite element method. The master’s thesis consists of five parts; at the very beginning there is a theoretical part, which briefly describes the history and future of the roadway structure, and a general description of the roadway structure in the present. Afterwards the dimensioning of roadway structure according to the technical specifications for roadways (TSC) is presented. We listed and described all conditions, recommendations and requirements which the project planner must apply when designing and dimensioning the roadway structure. Following the theoretical part there is a practical example of dimensioning roadway structure according to the TSC (empirical procedure of dimensioning of roadway structure), where we deal with a realistic example of a road section in the municipality Starše. In the last part a parametric analysis of the roadway structure by finite element method (MKE) is given and a conclusion follows. Based on the parametric analysis we have shown the impact of dimensions and properties of the built-in materials and the bearing capacity of the foundation to the durability of roadway structures. We compared the results of the analytical method to the TSC. We used Everstress software for the analytical method.
Sekundarne ključne besede: civil engineering;roadway construction;finite element method;technical specifications for roads;analytical method;empirical process;
Vrsta dela (COBISS): Magistrsko delo/naloga
Komentar na gradivo: Univ. v Mariboru, Fak. za gradbeništvo, prometno inženirstvo in arhitekturo, Gradbeništvo
Strani: XII, 100 str.
ID: 11463702