diplomsko delo - visokošolski strokovni študij
Tilen Podpečan (Avtor), Dominika Gornik Bučar (Recenzent), Marko Petrič (Mentor), Matjaž Pavlič (Komentor)

Povzetek

Ugotavljali smo povezave med rezultati določanja oprijemnosti premaznih sistemov, ki jih dobimo z različnimi metodami. Na bukove vzorce smo nanesli različne premazne sisteme: vodni, UV utrjujoči vodni in poliuretanski lak. Za določanje oprijemnosti smo uporabili različne metode, in sicer test s križnim rezom (SIST EN ISO 2409) ter 3 različice metode z odtrgovanjem pečatov (SIST EN 4624). Tako dobljene rezultate smo med seboj primerjali in statistično obdelali z računalniškim programom Statgraphics Centurion XVI. Izvedli smo test variance in nato z Duncanovim testom pri 95 % stopnji zaupanja dobljene rezultate razvrstili v homogene skupine. Rezultate, ki jih dobimo z metodo križnega reza, je nesmiselno primerjati s tistimi, ki jih dobimo s postopkom odtrgovanja pečatov. Možna pa je primerjava rezultatov, dobljenih s 3 različicami metode odtrgovanja pečatov. Najboljšo oprijemnost smo dosegli z UV-lakom, sledil je poliuretanski lak, najslabše rezultate pa smo dobili pri vodnem sistemu.

Ključne besede

bukovina;vodni laki;UV lak;poliuretanski lak;oprijemnost;križni rez;odtrgovanje pečatov;

Podatki

Jezik: Slovenski jezik
Leto izida:
Tipologija: 2.11 - Diplomsko delo
Organizacija: UL BF - Biotehniška fakulteta
Založnik: [T. Podpečan]
UDK: 674.07
COBISS: 2341513 Povezava se bo odprla v novem oknu
Št. ogledov: 407
Št. prenosov: 133
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Angleški jezik
Sekundarni naslov: ǂA ǂcomparison of different methods for the determination of adhesion of cured coatings on wood
Sekundarni povzetek: We were establishing the link between the results of determining the adhesion of coating systems obtained by various methods. We applied different coating systems on beech wood samples: water-borne, UV-curing water-borne and polyurethane finishes. To determine the adhesion we used different methods, namely the cross-cut test (SIST EN ISO 2409), and 3 versions of the pull-off test method (SIST EN 4624). The results were compared and statistically analyzed with a Statgraphics Centurion XVI computer program. We conducted a test of variance, after which the results were sorted into homogeneous groups with Duncan's test at the 95 % level of confidence. Comparison of the results obtained by the method of cross-cutting with those obtained by the pull-off test method does not make any sense. However, it is possible to compare the results obtained by the 3 versions of the pull-off test method. The best adhesion strength was achieved with UV-curing finish, followed by the polyurethane coating, and the worst results were obtained with the water-borne system.
Sekundarne ključne besede: beech wood;UV curing finish;polyurethane coating;water borne lacquer;adhesion;pull-off test;cross-cut test;
Vrsta dela (COBISS): Diplomsko delo
Komentar na gradivo: Univ. v Ljubljani, Biotehniška fak., Oddelek za lesarstvo
Strani: IXI, 37 f., [5] f. pril.
ID: 11905786