Robert Močnik (Avtor), Božo Koler (Avtor), Dejan Zupan (Avtor), Tomaž Ambrožič (Avtor)

Povzetek

This paper deals with the effects that displacements of the measuring pillar have on precise geodetic measurements. The changes in the position of the control points on the object or its surroundings can only be determined with well stabilized and stable reference points. These points are usually stabilized with measuring pillars which are not always constructed in an optimal manner. If they are placed in a dark tube with a high absorption factor, solar heating on one side of the pillar can cause the pillar to deflect considerably due to the temperature difference on the two sides of the pillar. This paper presents the influence of such a displacement, if the pillar is a survey point, orientation point, or control point. We show that even small displacement of the survey point can have important influence on all measurements and that the error in some cases significantly increases, e.g., if the standard deviations of the coordinates of the survey point are 1 mm and their covariance is assumed to be zero, the standard deviation of the distance between measured and exact position of the control point exceeds the value of 2.2 mm.

Ključne besede

geodezija;vpliv temperature;deformacija stebra;premik stebra;kontrolne meritve;geodesy;influence of temperature;deflection of the measuring pillar;displacement of the measuring pillar;control measurements;

Podatki

Jezik: Angleški jezik
Leto izida:
Tipologija: 1.01 - Izvirni znanstveni članek
Organizacija: UL FGG - Fakulteta za gradbeništvo in geodezijo
UDK: 528
COBISS: 41244419 Povezava se bo odprla v novem oknu
ISSN: 2076-3417
Matična publikacija: Applied sciences
Št. ogledov: 353
Št. prenosov: 103
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Slovenski jezik
Sekundarne ključne besede: geodezija;vpliv temperature;deformacija stebra;premik stebra;kontrolne meritve;
Vrsta dela (COBISS): Članek v reviji
Strani: str. 1-15
Letnik: ǂLetn. ǂ10
Zvezek: ǂšt. ǂ23/8319
Čas izdaje: nov. 2020
DOI: 10.3390/app10238319
ID: 12553454
Priporočena dela:
, diplomsko delo univerzitetnega študijskega programa
, diplomsko delo Visokošolskega strokovnega študijskega programa I. stopnje Strojništvo
, diplomsko delo univerzitetnega študijskega programa Gospodarsko inženirstvo - smer gradbništvo - 1. stopnja