Process parameters optimization for maximizing tensile strength in friction stir-welded carbon steel
Povzetek
The present study focuses on improving the ultimate tensile strength of friction stir welded carbon steel (AISI 1018). The effect of the process parameters (welding speed, tool RPM, and shoulder diameter) on the response parameters (ultimate tensile strength, percentage elongation and percentage reduction in area) were studied. Response surface methodology was used to develop the mathematical model for response parameters, and the adequacy of the model was checked using analysis of variance (ANOVA). The welding speed and tool RPM were found to affect the ultimate tensile strength significantly. The percentage elongation was affected only by welding speed. The percentage reduction in the area was affected by welding speed and shoulder diameter. The microstructure and microhardness of the weld have been studied and reported in the study.
Ključne besede
friction stir welding;steel;ANOVA;response surface methodology;ultimate tensile strength;microstructure;microhardness;
Podatki
| Jezik: | Angleški jezik |
|---|---|
| Leto izida: | 2021 |
| Tipologija: | 1.01 - Izvirni znanstveni članek |
| Organizacija: | UL FS - Fakulteta za strojništvo |
| UDK: | 621.791 |
| COBISS: |
69842435
|
| ISSN: | 0039-2480 |
| Št. ogledov: | 2130 |
| Št. prenosov: | 196 |
| Ocena: | 0 (0 glasov) |
| Metapodatki: |
|
Ostali podatki
| Sekundarni jezik: | Slovenski jezik |
|---|---|
| Sekundarni naslov: | Optimizacija parametrov procesa za povečanje natezne trdnosti ogljikovega jekla, torno varjenega z gnetenjem |
| Sekundarne ključne besede: | torno varjenje z gnetenjem;jeklo;ANOVA;metoda odzivnih površin;porušitvena natezna trdnost;morfologija loma;mikrostruktura;mikrotrdota; |
| Vrsta dela (COBISS): | Članek v reviji |
| Strani: | str. 311-321 |
| Letnik: | ǂVol. ǂ67 |
| Zvezek: | ǂno. ǂ6 |
| Čas izdaje: | June 2021 |
| DOI: | 10.5545/sv-jme.2021.7203 |
| ID: | 13119787 |
Priporočena dela:
Process parameters optimization for maximizing tensile strength in friction stir-welded carbon steel
2021,
ni podatka o podnaslovu
Varjenje z gnetenjem aluminijeve zlitine 2030
2019,
magistrsko delo magistrskega študijskega programa II. stopnje Strojništvo
FSW varjenje bakra
2021,
diplomsko delo Visokošolskega strokovnega študijskega programa I. stopnje Strojništvo
Oblikovno obločno navarjanje aluminijeve zlitine AlSi5 po postopku TIG
2023,
diplomsko delo Visokošolskega strokovnega študijskega programa I. stopnje Strojništvo - Projektno aplikativni program
Uporovno varjenje visokotrdnega jekla DP 500
2020,
ni podatka o podnaslovu