Zhiwen Wang (Avtor), Qingliang Zeng (Avtor), Zhenguo Lu (Avtor), Lirong Wan (Avtor), Xin Zhang (Avtor), Zhihai Liu (Avtor)

Povzetek

The circular saw blade is widely applied in rock processing; its cutting performance significantly impacts rock processing. Therefore, the numerical simulation model of rock cutting with the flexible circular saw blade has been established to investigate the effects of cutting parameters on the stress and cutting force of circular saw blade, and the damage and stress of rock in the circular saw blade cutting into rock vertically at constant feed speed and rotation speed. The research results indicate that the stress of the saw blade and rock rises with the increase of feed speed and rotation speed of the saw blade. Furthermore, the rock damage and the cutting force of the circular saw blade increase with the increasing feed speed and decrease with increasing rotation speed. The circular saw blade cutting force, vertical force, and horizontal force increase with the rising distance between the double circular saw blade. However, the axial force decreases. The research results of cutting hard rock with the flexible circular saw blade can aid in the optimization of cutting parameters and improve cutting efficiency.

Ključne besede

circular saw blades;rock damage;cutting forces;stress;

Podatki

Jezik: Angleški jezik
Leto izida:
Tipologija: 1.01 - Izvirni znanstveni članek
Organizacija: UL FS - Fakulteta za strojništvo
UDK: 621.9
COBISS: 94094851 Povezava se bo odprla v novem oknu
ISSN: 0039-2480
Št. ogledov: 108
Št. prenosov: 35
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Slovenski jezik
Sekundarni naslov: Preiskava zmogljivosti rezanja s krožno žago v paketu ANSYS/LS-DYNA
Sekundarne ključne besede: listi krožne žage;poškodbe kamna;rezalne sile;napetosti;podajanje;vrtilna hitrost;
Vrsta dela (COBISS): Članek v reviji
Strani: str. 649-665
Letnik: ǂVol. ǂ67
Zvezek: ǂno. ǂ12
Čas izdaje: Dec. 2021
DOI: 10.5545/sv-jme.2021.7322
ID: 14306013