Jaka Petelin (Avtor), Luka Černe (Avtor), Jaka Mur (Avtor), Vid Agrež (Avtor), Jernej Jan Kočica (Avtor), Jörg Schille (Avtor), Udo Loeschner (Avtor), Rok Petkovšek (Avtor)

Povzetek

In this manuscript we present a true pulse-on-demand laser design concept using two different approaches. First, we present a fiber master oscillator power amplifier (MOPA) based quasi-continuous wave (CW) laser, working at high modulation bandwidths, for generation of nanosecond pulses. Second, we present a hybrid chirped pulse amplification (CPA)-based laser, combining a chirped-pulse fiber amplifier and an additional solid-state amplifier, for generation of femtosecond pulses. The pulse-on-demand operation is achieved without an external optical modulator/shutter at high-average powers and flexible repetition rates up to 40 MHz, using two variants of the approach for near-constant gain in the amplifier chain. The idler and marker seed sources are combined in the amplifier stages and separated at the out using either wavelength-based separation or second harmonic generation (SHG)-generation-based separation. The nanosecond laser source is further applied to high throughput processing of thin film materials. The laser is combined with a resonant scanner, using the intrinsic pulse-on-demand operation to compensate the scanner%s sinusoidal movement. We applied the setup to processing of indium tin oxide (ITO) and metallic films on flexible substrates.

Ključne besede

arbitrary repetition rate;fiber lasers;gain control;high speed processing;pulse-on-demand;

Podatki

Jezik: Angleški jezik
Leto izida:
Tipologija: 1.01 - Izvirni znanstveni članek
Organizacija: UL FS - Fakulteta za strojništvo
UDK: 621.7.015:621.375.826
COBISS: 74192131 Povezava se bo odprla v novem oknu
ISSN: 2192-8576
Št. ogledov: 54
Št. prenosov: 34
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Slovenski jezik
Sekundarne ključne besede: poljubna ponavljalna frekvenca;vlakenski laserji;kontrola ojačenja;hitro procesiranje;blisk na zahtevo;
Vrsta dela (COBISS): Članek v reviji
Strani: str. 305-314
Letnik: ǂVol. ǂ10
Zvezek: ǂiss. ǂ4/5
Čas izdaje: 2021
DOI: 10.1515/aot-2021-0020
ID: 15882529
Priporočena dela:
, ni podatka o podnaslovu
, ni podatka o podnaslovu
, zaključna naloga Univerzitetnega študijskega programa I. stopnje Strojništvo - Razvojno raziskovalni program
, ni podatka o podnaslovu
, ni podatka o podnaslovu