Experimental investigation of buckling stability of superelastic Ni-Ti tubes under cyclic compressive loading

towards defining functionally stable tubes for elastocaloric cooling

Luka Porenta (Avtor), Jonas Trojer (Avtor), Miha Brojan (Avtor), Jaka Tušek (Avtor)

Povzetek

Elastocaloric cooling technology recently attracted significant attention as an environmental friendly alternative to vapor-compression technology. It is based on the elastocaloric effect, which occurs in superelastic shape memory alloys (SMAs) during stress-induced martensitic transformation. To date, several proof-of-concept devices (mostly based on tensile loading) have been developed, but limited fatigue life was shown to be one of the major issues. Compressive loading improves the fatigue life of such devices significantly, but in return buckling of SMA structure might occur. To overcome this challenge, it is crucial to understand the buckling phenomena of SMA structures, especially for thin-walled tubes that seem to be ideal candidates for application in elastocaloric cooling devices. Here, we experimentally investigated the effects of the diameter-to-thickness ratio (D$_{out}$/t) and slenderness (λ) on buckling stability of Ni-Ti tubes that were subjected to cyclic compressive loading. In total, 161 superelastic Ni-Ti tubes with outer diameter (D$_{out}$) ranging from 2 mm to 3 mm, D$_{out}$/t ranging from 5 to 25 and gauge lengths (L$_g$) ranging from 6 to 20 mm were tested. The loading procedure consisted of 3 parts: (I) 1 isothermal full-transformation loading cycle, (II) 50 training cycles, and (III) 20 adiabatic cycles to simulate loading conditions in elastocaloric device. We constructed experimental phase diagrams of buckling modes in λ – D$_{out}$/t space for constant D$_{out}$ and in λ – D$_{out}$ space for constant D$_{out}$/t ratio. Marked areas of functionally stable tubes in these phase diagrams give the design guidance for future developments of durable and efficient elastocaloric devices and other applications, e.g. actuators and dampers.

Ključne besede

shape-memory material;elastocaloric effect;stability of cylindrical shells;

Podatki

Jezik:	Angleški jezik
Leto izida:	2022
Tipologija:	1.01 - Izvirni znanstveni članek
Organizacija:	UL FS - Fakulteta za strojništvo
UDK:	539.3
COBISS:	122518275
ISSN:	0020-7683
Št. ogledov:	89
Št. prenosov:	45
Ocena:	0 (0 glasov)
Metapodatki:

Ostali podatki

Sekundarni jezik:	Slovenski jezik
Sekundarne ključne besede:	material z oblikovnim spominom;elastokalorični učinek;stabilnost cilindričnih lupin;
Vrsta dela (COBISS):	Članek v reviji
Strani:	str. 1-15
Zvezek:	ǂVol. ǂ256
Čas izdaje:	Dec. 2022
DOI:	10.1016/j.ijsolstr.2022.111948
ID:	16587685