Ana Frankovič (Avtor), Vilma Ducman (Avtor), Sabina Kramar (Avtor), Matteo Panizza (Avtor), Sergio Tamburini (Avtor), Marco Natali (Avtor), Katherine-Maria Pappas (Avtor), Constantinos Tsoutis (Avtor), Adriana Bernardi (Avtor)

Povzetek

Novel prefabricated insulating façade panels were developed from construction and demolition waste (CDW) aggregates under the framework of the European H2020 project InnoWEE. These non-structural components, aimed at improving the thermal efficiency of existing buildings, consist of an insulating plate covered by a facing layer made of CDW aggregates bound with metakaolin, furnace slag and class F fly ash activated by a potassium silicate solution. The paper presents the design and assessment of the binder and panels for exterior use, taking into account mechanical performance, behaviour in the presence of water and durability issues. Testing was carried out on both laboratory prototypes and panels from the pilot industrial production.

Ključne besede

gradbeni odpad;alkalijsko aktivirani materiali;geopolimeri;lastnosti;pilotna proizvodnja;construction and demolition waste;alkali activated materials;geopolymers;properties;up-scalimg;

Podatki

Jezik: Angleški jezik
Leto izida:
Tipologija: 1.01 - Izvirni znanstveni članek
Organizacija: ZAG - Zavod za gradbeništvo Slovenije
Založnik: Scientific & Technical Press
UDK: 620.1/.2
COBISS: 26646531 Povezava se bo odprla v novem oknu
ISSN: 0950-0618
Št. ogledov: 7
Št. prenosov: 3
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Slovenski jezik
Sekundarne ključne besede: gradbeni odpad;alkalijsko aktivirani materiali;geopolimeri;lastnosti;pilotna proizvodnja;
Komentar vira: Št. članka: 120475;
Strani: str. 1-13
Zvezek: ǂVol. ǂ262
Čas izdaje: Nov. 2020
DOI: 10.1016/j.conbuildmat.2020.120475
ID: 19829962