Thangavel Karthik (Avtor), Nagarajan Srinivasan (Avtor), Duraisamy Rajenthirakumar (Avtor), Ramasamy Sridhar (Avtor)

Povzetek

The single point incremental forming process (SPIF) is materialized to form the desired shapes in low-cost sheet metal processing and well suited for low batch components and customized designs. Many modifications have been attempted in recent years to maximize the formability, geometric accuracy and quality of the SPIF formed parts. In this work, an attempt has been made to analyse the influence of process parameters namely ball tool diameter, step size, spindle speed and sheet thickness on final wall thickness, forming force and surface roughness. The optimized results exhibit the desirable formability when the roller ball tool diameter of the tool is 12 mm. The results also project that formability of the sheet metal is minimized when the spindle speed is increased and the ball diameter maximizes the accuracy and surface roughness. Also minimizing the step size increases the product quality features. Upon conducting this multi-response optimization by grey based response surface methodology (RSM) technique It is identified that 12 mm ball diameter of the tool, 0.25 mm step size, 2445 rpm spindle speed, and 2 mm sheet thickness are the obtained optimized SPIF process parameters as confirmed through confirmation experiments.

Ključne besede

grey based RMS;single point incremental forming;roller ball tool;surface roughness;

Podatki

Jezik: Angleški jezik
Leto izida:
Tipologija: 1.01 - Izvirni znanstveni članek
Organizacija: UL FS - Fakulteta za strojništvo
UDK: 621.7
COBISS: 211618819 Povezava se bo odprla v novem oknu
ISSN: 0039-2480
Št. ogledov: 14
Št. prenosov: 0
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Slovenski jezik
Sekundarni naslov: Večkriterijska optimizacija točkovnega inkrementalnega preoblikovanja pločevine iz materiala Al 6061 po metodi odzivnih površin za siv sistem
Sekundarne ključne besede: točkovno inkrementalno preoblikovanje;Al 6061;preoblikovalnost;metoda odzivnih površin;
Vrsta dela (COBISS): Članek v reviji
Strani: str. 507-514
Letnik: ǂVol. ǂ70
Zvezek: ǂno. ǂ9/10
Čas izdaje: Sept.-Oct. 2024
DOI: 10.5545/sv-jme.2023.618
ID: 25301050