magistrsko delo
Jernej Hribar (Avtor), Valentin Ažbe (Mentor), Borut Zemljarič (Komentor)

Povzetek

Termična analiza kablov je pomembno področje pri načrtovanju omrežja. S kablitvijo omrežja se odvečna toplota kabla odvaja drugače kot prosto v zraku. Kritične točke z vidika termične analize so zatesnjeni prehodi. V ta namen je bilo analizirano področje termične analize kablov, pregledana obstoječa dokumentacija in izdelan program za izračun termičnih razmer za različne situacije. Program temelji na metodi končnih elementov in je bil izdelan v odprtokodnem programskem okolju FreeFEM++. Podrobneje je bil analiziran zatesnjen prehod kabla skozi betonsko steno, saj je predpostavljeno, da je to ena izmed najbolj kritičnih točk termične analize. Termične razmere pri prehodu enega kabla skozi zatesnjen prehod so izračunane analitično in numerično – z metodo končnih elementov. Rezultati posamezne metode so med seboj primerjani. Za konec so termične razmere s pomočjo metode končnih elementov izračunane v 3D prostoru za primer, ki ga je mogoče srečati v praksi – zatesnjen prehod trifaznega sistema skozi betonsko steno. Rezultati so potrdili predpostavko, da je zatesnjen prehod betonske stene kritična točka z vidika termičnih razmer. Ugotovljeno je bilo namreč, da se tam izgubna toplota najslabše odvaja. Posledično je temperatura tam najvišja.

Ključne besede

termična analiza;kablovod;zatesnjen prehod kabla;metoda končnih elementov;toplotna prevodnost;magisteriji;

Podatki

Jezik: Slovenski jezik
Leto izida:
Tipologija: 2.09 - Magistrsko delo
Organizacija: UL FE - Fakulteta za elektrotehniko
Založnik: [J. Hribar]
UDK: 621.311(043.3)
COBISS: 219203075 Povezava se bo odprla v novem oknu
Št. ogledov: 74
Št. prenosov: 34
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Angleški jezik
Sekundarni naslov: Thermal analysis of a power cable passing through a wall using the finite element method
Sekundarni povzetek: Thermal analysis of cables is an important area in network design. By cabling the network, the excess heat of the cable is dissipated differently than network free in the air. The critical points from the point of view of thermal analysis are the sealed passages in the walls. To this end, the field of thermal analysis of cables has been analysed, existing documentation has been reviewed and a program has been developed to calculate thermal conditions for different situations. The program is based on the finite element method and was developed in the open source FreeFEM++ programming environment. The sealed cable passage through the concrete wall was analysed in more detail, as it is assumed that this is one of the most critical points of the thermal analysis. The thermal conditions for a single cable passing through the sealed transition are calculated analytically and numerically - using the finite element method. The results of each method are compared with each other. Finally, the thermal conditions using the finite element method are calculated in 3D space for a case that can be encountered in practice - the crossing of a three-phase system through a sealed passage of a concrete wall. The results confirm the assumption that the crossing of the concrete wall through the sealed passage is the critical point in terms of thermal conditions. In fact, it is found that the waste heat is dissipated worst there. Therefore, the temperature is the highest there.
Sekundarne ključne besede: thermal analysis;cable;sealed passage of cable;finite element method;thermal conductivity;
Vrsta dela (COBISS): Magistrsko delo/naloga
Študijski program: 1000316
Komentar na gradivo: Univ. v Ljubljani, Fak. za elektrotehniko
Strani: 1 spletni vir (1 datoteka PDF (XI, 72 str.))
ID: 25443810