Izdelava 3R modela jadrnice s fotogrametrično metodo

Povzetek

Ključne besede

Podatki

Jezik:	Slovenski jezik
Leto izida:	2008
Izvor:	Ljubljana
Tipologija:	2.11 - Diplomsko delo
Organizacija:	UL FGG - Fakulteta za gradbeništvo in geodezijo
Založnik:	[N. Mataija Valh]
UDK:	528.7:771(043.2)
COBISS:	4015201
Št. ogledov:	2092
Št. prenosov:	461
Ocena:	0 (0 glasov)
Metapodatki:

Ostali podatki

Sekundarni jezik:	Angleški jezik
Sekundarni naslov:	Construction of a 3D model of a sailer using a photogrammetric method
Sekundarni povzetek:	The wish to test the possibility of using an amateur (non-metrical) digital camera and a photogrammetric method of stereo-image restitution to construct a 3D model of the sailer has led to a concrete result - a 3D model of the hull of the chosen sailer First 40.7. Knowing the camera's internal orientation elements which were acquired through the process of calibration was necessary. The 3D model of the sailer was made using a photogrammetric method which is based on stereoscopic observation. I needed the stereo-pairs of the sailer, and I made them based upon a plan that I had prepared beforehand. With an electronic tachymeter with classical geodetic measurements I measured the control points and check points as well as additional longitudal profiles used for the analysis of photogrammetric observation quality. In order to acquire the 3D data to make a 3D model of the sailer I continued the work on a digital photogrammetric station which enabled stereo-pair orientation, 3D observation and measurements of the stereomodel. I measured the longitudinal and transverse profiles which were the basis of a 3D wire-frame model. By processing longitudinal and transverse profiles of the 3D wire-frame model of the sailer's hull with CAD software I realized the basis for the making of the surface 3D model, which represents my final product. With the making of the 3D model I demonstrated that with the help of stereo-image restitution and an amateur camera 3D data of satisfactory quality (centimetre precision) can be acquired and used for the making of a 3D model in a corresponding CAD software. The 3D model made can be used for testing the capacity of the sailer, it can also be used for various simulations, animations or visualizations.
Sekundarne ključne besede:	geodesy;3D model;photogrammetric method;stereoscopic observation;digital camera;
Vrsta datoteke:	application/pdf
Vrsta dela (COBISS):	Diplomsko delo
Komentar na gradivo:	Univ. v Ljubljani, Fak. za gradbeništvo in geodezijo
Strani:	XIV, 54 str., pril.
Vrsta dela (ePrints):	thesis
Naslov (ePrints):	Izdelava 3R modela jadrnice s fotogrametrično metodo
Ključne besede (ePrints):	geodezija;diplomska dela;UNI;3R model;fotogrametrična metoda;stereoskopsko opazovanje;digitalni fotoaparat;
Ključne besede (ePrints, sekundarni jezik):	geodesy;3D model;photogrammetric method;stereoscopic observation;digital camera;
Ključne besede (ePrints, sekundarni jezik):	geodesy;3D model;photogrammetric method;stereoscopic observation;digital camera;
ID:	8310616