Sekundarni jezik: |
Angleški jezik |
Sekundarni naslov: |
Determination of pillars coordinates and benchmark altitude in the classroom "Zimske vaje" |
Sekundarni povzetek: |
The purpose of my thesis is to determine the new coordinates and the accuracy of the pillars, which are located at the Faculty of civil and geodetic engineering in the classroom called 'Zimske vaje'. The coordinates of the pillars that I was searching for, were included in the geodetic network, which was created around the faculty. In the network itself I was measuring angles and lengths, which were later reduced for all the necessary corrections. Finally, I adjusted the network to get the adjustments of the new coordinates in the classroom 'Zimske vaje' and accuracy of the new coordinate of the points. The thesis continues with examination of types of networks and methods of measurement and description of the instruments used in the work.
In the second part of this thesis is a description of the measurement of the RFgg benchmark height. This benchmark represents the brass plug located on the pillars in the classroom 'Zimske vaje'. Then it follows an analysis of how the levelling is conducted and a brief description of the system heights in geodesy. |
Sekundarne ključne besede: |
geodesy;surveying network;altitudine network;adjustament network;reduction of the lenght; |
Vrsta datoteke: |
application/pdf |
Vrsta dela (COBISS): |
Diplomsko delo |
Komentar na gradivo: |
Univ. v Ljubljani, Fak. za gradbeništvo in geodezijo |
Strani: |
XVI, 52 str., 13 str. pril. |
Vrsta dela (ePrints): |
thesis |
Naslov (ePrints): |
Determination of pillars coordinates and benchmark altitude in the classroom "zimske vaje" at UL FGG |
Ključne besede (ePrints): |
ravninska mreža;višinska mreža;izravnava mreže;redukcija dolžin. |
Ključne besede (ePrints, sekundarni jezik): |
Determination of pillars coordinates and benchmark altitude in the classroom 'Zimske vaje' at UL FGG |
Povzetek (ePrints): |
Namen moje diplomske naloge je določitev novih koordinat in natančnosti stebrov, ki se
nahajajo na Fakulteti za gradbeništvo in geodezijov učilnici imenovani 'Zimske vaje'. Iskane koordinate stebrov sem vključil v geodetsko mrežo, ki je bila vzpostavljena v okolici fakultete. V mreži sem meril kote in dolžine, ki so bile kasneje reducirane za vse potrebne popravke. Mrežo sem na koncu izravnal, da sem dobil izravnane koordinate stebrov v učilnici 'Zimske vaje' in natančnosti novih koordinat točk. V nalogi opisujem še vrste mrež in metode merjenja, opisan je tudi inštrumentarij, uporabljen pri delu.
V drugem delu diplomske naloge je opis meritve višine reperja RFgg. Reper predstavlja
medeninasti čep, postavljen na stebru v učilnici 'Zimske vaje'. Sledi še analiza poteka
niveliranja in kratek opis sistemov višin v geodeziji. |
Povzetek (ePrints, sekundarni jezik): |
The purpose of my thesis is to determine the new coordinates and the accuracy of the pillars, which are located at the Faculty of civil and geodetic engineering in the classroom called 'Zimske vaje'. The coordinates of the pillars that I was searching for, were included in the geodetic network, which was created around the faculty. In the network itself I was measuring angles and lengths, which were later reduced for all the necessary corrections. Finally, I adjusted the network to get the adjustments of the new coordinates in the classroom 'Zimske vaje' and accuracy of the new coordinate of the points. The thesis continues with examination of types of networks and methods of measurement and description of the instruments used in the work.
In the second part of this thesis is a description of the measurement of the RFgg benchmark height. This benchmark represents the brass plug located on the pillars in the classroom 'Zimske vaje'. Then it follows an analysis of how the levelling is conducted and a brief description of the system heights in geodesy. |
Ključne besede (ePrints, sekundarni jezik): |
Determination of pillars coordinates and benchmark altitude in the classroom 'Zimske vaje' at UL FGG |
ID: |
8312413 |