diplomska naloga
Pavle Fenjveši (Avtor), Matjaž Dolšek (Mentor), Tomaž Hozjan (Član komisije za zagovor), Jure Snoj (Komentor)

Povzetek

V diplomski nalogi smo obravnavali dvoetažno armiranobetonsko stavbo, grajeno po sistemu JUBHome. Gre za energijsko učinkovit sistem, ki je sestavljen iz sklopov JUBHome BASE, JUBHome WALL, JUBHome FLOOR in JUBHome ROOF. V nalogi smo se omejili na projektiranje temeljnega in stenskega konstrukcijskega sklopa. Navodila za potresnoodporno projektiranje stavb JUBHome so bila razvita na Inštitutu za konstrukcije, potresno inženirstvo in računalništvo (FGG-IKPIR). Način projektiranja temelji na principu ciljne zanesljivosti objekta ter eksperimentalnih raziskavah, ki so bile izvedene na Fakulteti za gradbeništvo in geodezijo (FGG) in Zavodu za gradbeništvo Slovenije. V prvem delu diplomske naloge so opisana navodila za projektiranje temeljnega in stenskega sklopa stavbe JUBHome. Sledi opis objekta in modalna analiza s spektri odziva, ki smo jo izvedli s programom SAP2000. Podajnost toplotne izolacije pod temeljno ploščo smo modelirali na približen način. Preverili smo kontrole za prevrnitve objekta, prekoračitve tlačnih in strižnih napetosti v toplotni izolaciji pod temelji ter zdrsa objekta. Vse kontrole se izidejo. Pri stenah smo preverili upogibno in strižno nosilnost sten in delovnih stikov, končno pa smo še dimenzionirali kritično steno in izrisali armaturni načrt.

Ključne besede

gradbeništvo;diplomska naloga;potresnoodporno projektiranje;JUBHome BASE;JUBHome WALL;Evrokod 8;minimalna armatura;temeljna plošča;SAP2000;velika;šibko armirana stena;

Podatki

Jezik: Slovenski jezik
Leto izida:
Tipologija: 2.11 - Diplomsko delo
Organizacija: UL FGG - Fakulteta za gradbeništvo in geodezijo
Založnik: [P. Fenjveši]
UDK: 624.042.07:721(497.4)(043.2)
COBISS: 7843937 Povezava se bo odprla v novem oknu
Št. ogledov: 2967
Št. prenosov: 784
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Angleški jezik
Sekundarni naslov: Earthquake-resistant design of house JUBHome
Sekundarni povzetek: In the thesis a two story reinforced concrete building built according to the system JUBHome is designed. JUBHome is an energy efficient system, which composed of the following subassemblages: JUBHome BASE, JUBHome WALL, JUBHome FLOOR and JUBHome ROOF. The study presented in the thesis was limited to design of foundation sub-assemblage and the wall. The guidelines for design of such systems were developed at the Institute of Structural Engineering, Earthquake Engineering and Construction IT (FGG-IKPIR). The design is based on the target risk and the experimental investigations which performed at the Faculty of Civil and Geodetic engineering (FGG). In the first part of the thesis the guidelines for earthquake-resistant design of JUBHome buildings is presented. Follows the description of the investigated building and response spectrum analysis, which was performed by program SAP2000. The flexibility of thermal insulation under the foundation slab was modeled in approximate manner. It was proved that the conditions against the overturning and the sliding of the building are satisfied and that the stresses in the thermal insulation do not exceed the capacity. The selected wall was then designed in order to achieve adequate shear and flexural strength. The reinforcement plan for the designed wall is presented at the end of the thesis.
Sekundarne ključne besede: civil engineering;graduation thesis;earthquake-resistant design;JUBHome BASE;JUBHome WALL;minimum requirements;foundation slab;SAP2000;large lightly reinforced wall;
Vrsta datoteke: application/pdf
Vrsta dela (COBISS): Diplomsko delo
Komentar na gradivo: Univ. v Ljubljani, Fak. za gradbeništvo in geodezijo
Strani: XIV, 61 str., 1 pril.
ID: 9235987