Srđan Podrug (Avtor), Srečko Glodež (Avtor), Damir Jelaska (Avtor)

Povzetek

A computational model for determination of crack growth in a gear tooth root is presented. Two loading conditions are taken into account: (i) normal pulsating force acting at the highest point of the single tooth contact and (ii) the moving load along the tooth flank. In numerical analysis it is assumed that the crack is initiated at the point of the largest stresses in a gear tooth root. The simple Paris equation is then used for a further simulation of the fatigue crack growth. The functional relationship between the stress intensity factor and crack length K=f(a), which is needed for determining the required number of loading cycles N for a crack propagation from the initial to the critical length, is obtained using a displacement correlation method in the framework of the FEM-method considering the effect of crack closure. The model is used for determining fatigue crack growth in a real gear made from case carburised and ground steel 14CiNiMo13-4, where the required material parameters were determined previously by appropriate test specimens. The results of the numerical analysis show that the prediction of crack propagation live and crack path in a gear tooth root are significantly different for both loading conditions considered.

Ključne besede

gears;fatigue;crack growth;numerical modelling;

Podatki

Jezik: Angleški jezik
Leto izida:
Tipologija: 1.01 - Izvirni znanstveni članek
Organizacija: UM FNM - Fakulteta za naravoslovje in matematiko
Založnik: = Association of Mechanical Engineers and Technicians of Slovenia et al.
UDK: 621.833:539.4
COBISS: 18575368 Povezava se bo odprla v novem oknu
ISSN: 0039-2480
Matična publikacija: Strojniški vestnik
Št. ogledov: 389
Št. prenosov: 20
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Slovenski jezik
Sekundarne ključne besede: zobniki;utrujanje;širjenje razpoke;numerično modeliranje;
URN: URN:NBN:SI:doc-OP2WLSV8
Vrsta dela (COBISS): Delo ni kategorizirano
Strani: str. 579-586
Letnik: Vol. 57
Zvezek: no. 7/8
Čas izdaje: jul.-avg. 2011
DOI: 10.5545/sv-jme.2009.127
ID: 1727942