Modeling of heat pump tumble dryer energy consumption and drying time

Pero Gatarić (Author), Brane Širok (Author), Marko Hočevar (Author), Lovrenc Novak (Author)

Abstract

The use of heat pump tumble dryers is nowadays more common because they offer huge energy savings compared to conventional tumble dryers. Earlier studies made on conventional tumble dryers have shown that parameters such as heater power, fan speed, drum speed, weight and initial moisture content of textiles and air leakage have a huge impact on the energy efficiency and drying time. In the present study, a modified commercial heat pump tumble dryer was evaluated for energy consumption and drying time by changing operating parameters including fan speed, drum speed, and mass load. The total energy consumption and drying time were measured and corrected for the initial and final moisture content in the textiles. The experimental results based on 27 drying tests were evaluated to develop linear regression models for energy consumption and drying time, which show a good agreement with the experimental data. The results show that a large mass load, a high drum speed, and a low fan speed give the highest energy efficiency, i.e. the lowest energy consumption per kg of drying load. Larger loads extend the length of the drying cycle while higher fan and drum speeds result in shorter drying time.

Keywords

heat pump tumble dryers;energy consumption;drying time;regression analysis;

Data

Language:	English
Year of publishing:	2019
Typology:	1.01 - Original Scientific Article
Organization:	UL FS - Faculty of Mechanical Engineering
UDC:	621.577:648.336(045)
COBISS:	16268571
ISSN:	0737-3937
Views:	370
Downloads:	204
Average score:	0 (0 votes)
Metadata:

Other data

Secondary language:	Slovenian
Secondary keywords:	sušenje tekstila;sušilni stroji;toplotne črpalke;modeliranje;
Type (COBISS):	Article
Embargo end date (OpenAIRE):	2020-01-01
Pages:	str. 1396-1404
Volume:	ǂVol. ǂ37
Issue:	ǂno. ǂ11
Chronology:	2019
DOI:	10.1080/07373937.2018.1502778
ID:	12806426