Pero Gatarić (Avtor), Brane Širok (Avtor), Jurij Gostiša (Avtor)

Povzetek

Leakage of air in tumble dryers is an important parameter regarding the energy efficiency of the drying process. In general, tumble dryers are prone to leakage, therefore further investigation and optimization in this field is of great interest. This study investigates and quantifies leakage of air within the closed-loop system of an in-situ household heat pump tumble dryer. Each potential leakage location was characterized by leakage curve obtained either by isolated or cumulative measurements using system pressurization method. Based on the static pressure distribution within the closed-loop system, the leakage outflow and inflow were quantified. The leakage of air at the rear and front drum seal was evaluated with and without drum movement. The results indicated the highest leakage outflow rate at the heat pump housing, which represents 12,6% of the total drying air flow rate within the closed-loop system. Sealing heat pump housing improved the condensation efficiency from B to A class according to the IEC 61121.

Ključne besede

heat pumps;tumble dryers;leakage;energy efficiency;condensation efficiency;

Podatki

Jezik: Angleški jezik
Leto izida:
Tipologija: 1.01 - Izvirni znanstveni članek
Organizacija: UL FS - Fakulteta za strojništvo
UDK: 621.577:648.336
COBISS: 108705027 Povezava se bo odprla v novem oknu
ISSN: 0737-3937
Št. ogledov: 24
Št. prenosov: 10
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Slovenski jezik
Sekundarne ključne besede: sušilni stroji;toplotne črpalke;netesnost;energetska učinkovitost;merilne metode;
Vrsta dela (COBISS): Članek v reviji
Strani: str. 3622-3630
Letnik: ǂVol. ǂ40
Zvezek: ǂiss. ǂ16
Čas izdaje: 2022
DOI: 10.1080/07373937.2022.2073596
ID: 17623730