Benjamin Bizjan (Author), Brane Širok (Author), Jinpeng Chen (Author)

Abstract

This paper presents an optical method and system for contactless measurement of the mass flow rate of melts by digital cameras. The proposed method is based on reconstruction of melt stream geometry and flow velocity calculation by cross correlation, and is very cost-effective due its modest hardware requirements. Using a laboratory test rig with a small inductive melting pot and reference mass flow rate measurement by weighing, the proposed method was demonstrated to have an excellent dynamic response (0.1 s order of magnitude) while producing deviations from the reference of about 5% in the steady-state flow regime. Similar results were obtained in an industrial stone wool production line for two repeated measurements. Our method was tested in a wide range of melt flow rates (0.05-1.2 kg/s) and did not require very fast cameras (120 frames per second would be sufficient for most industrial applications).

Keywords

optical measurements;mass flow rate;melt;

Data

Language: English
Year of publishing:
Typology: 1.01 - Original Scientific Article
Organization: UL FS - Faculty of Mechanical Engineering
UDC: 535(045)
COBISS: 16345371 Link will open in a new window
ISSN: 1559-128X
Views: 624
Downloads: 286
Average score: 0 (0 votes)
Metadata: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Other data

Secondary language: Slovenian
Secondary keywords: optične meritve;masni pretok;taline;
Type (COBISS): Article
Embargo end date (OpenAIRE): 2019-05-20
Pages: str. 4202-4210
Volume: ǂVol. ǂ57
Issue: ǂiss. ǂ15
Chronology: May 2018
DOI: 10.1364/AO.57.004202
ID: 12855952
Recommended works:
, diplomska naloga visokošolskega strokovnega študija
, zaključna naloga Razvojno raziskovalnega programa I. stopnje Strojništvo
, diplomska naloga [visokega] strokovnega študijskega programa