Ocena tveganja za varnost in zdravje za montažni stroj MN SS03

diplomsko delo Visokošolskega strokovnega študijskega programa I. stopnje Strojništvo

Jaka Oblak (Author), Boris Jerman (Mentor)

Abstract

V evropskem parlamentu je bila sprejeta Direktiva 2006/42/ES o strojih z namenom povečanja varnosti in zdravja ljudi in okolja, v katerem stroj deluje. Podaja bistvene zahteve s področja varnosti in zdravja ljudi pri uporabi strojev, ki jih mora stroj, ki je dan na trg ali v obratovanje v EU, izpolnjevati. Skladnost strojev z Direktivo podjetja dokazujejo z izdelavo tehnične mape stroja, ki vsebuje tudi oceno tveganja, katere postopek nam podaja harmoniziran standard SIST EN ISO 12100. V prvem delu diplomske naloge je predstavljena tehnična zakonodaja za proizvode, predvsem Direktiva 2006/42/ES o strojih, njeni členi in priloge. Sledi opis standardnega iterativnega postopka ocene in zmanjševanja tveganja, ter predstavitev kvalitativnega postopka ocenjevanja tveganja s številskim vrednotenjem tveganja po Reudenbachu, ki smo ga uporabili pri ocenjevanju tveganja. Za pomoč pri izdelavi ocene tveganja smo izdelali predloge za identifikacijo nevarnosti, izračun ocene tveganja in zmanjševanje tveganja. Postopek ocenjevanja tveganja je v nalogi prikazan in pojasnjen na primeru mehanske nevarnosti vrtljivih elementov montažnega stroja MN SS03. Celotna ocena se nahaja v prilogi A. Iz nje je razvidno, kako smo s pomočjo postopka zmanjševanja tveganja previsoka tveganja zmanjšali na dopustni nivo in na ta način zagotovili varnost stroja.

Keywords

diplomske naloge;tehnična zakonodaja;direktiva 2006/42/ES;ocena tveganja;zmanjševanje tveganja;standard SIST EN ISO 12100;montažni stroj;

Data

Language:	Slovenian
Year of publishing:	2021
Typology:	2.11 - Undergraduate Thesis
Organization:	UL FS - Faculty of Mechanical Engineering
Publisher:	[J. Oblak]
UDC:	621:331.45:613.6:34(043.2)
COBISS:	84447235
Views:	752
Downloads:	151
Average score:	0 (0 votes)
Metadata:

Other data

Secondary language:	English
Secondary title:	Risk assessment for safety and health for the assembly machine MN SS03
Secondary abstract:	The European Parliament adopted Machine Directive 2006/42 / EC with a view to enhancing the safety and health of people and the environment in which machinery operates. It sets out the essential safety and health requirements for the use of machinery that a machine placed on the market or put into service in the EU must meet. The company proves the compliance of machines with the Directive by preparing a technical map of the machine, which also contains a risk assessment, the basic procedure of which gives us a harmonized standard SIST EN ISO 12100. The first part of the thesis presents technical legislation for products, especially Machine Directive 2006/42 / EC , its articles and annexes. The following is a description of the standard iterative risk assessment and risk reduction procedure, and a presentation of the qualitative procedure with numerical evaluation of risk according to Reudenbach, which we used in the risk assessment. To help with the risk assessment, we developed proposals for hazard identification, risk assessment calculation and risk reduction. The risk assessment procedure is shown and explained in the thesis on the case of mechanical hazard of rotating elements of the MN SS03 assembly machine. The full assessment can be found in Annex A. It shows how we used the risk reduction process to reduce the excessive risks to an acceptable level and thus ensure the safety of the machine.
Secondary keywords:	thesis;technical legislation;directive 2006/42/EC;risk assessment;risk reduction;standard SIST EN ISO 12100;assembly machine;
Type (COBISS):	Bachelor thesis/paper
Study programme:	0
Embargo end date (OpenAIRE):	1970-01-01
Thesis comment:	Univ. v Ljubljani, Fak. za strojništvo
Pages:	XXII, 80 str.
ID:	13694358