magistrsko delo
Peter Brglez (Author), Rok Klobučar (Mentor), Bojan Ačko (Co-mentor), Martin Podgrajšek (Co-mentor)

Abstract

Magistrsko delo je nastalo v sodelovanju s podjetjem Unior d.d. iz Zreč. Izhaja iz problema prehitre obrabe merilnega sistema, ki se uporablja za merjenje debelin ohišij na kontrolni liniji B1. Prekratek čas do uničenja merilnega sistema potegne za sabo stroške, ki pa niso samo stroški menjave merilnikov, temveč tudi stroški reklamacij, transporta in lažnega izmeta. Zato so me prosili, da raziščem alternativne možnosti, ki bi lahko zamenjale obstoječi način merjenja z brezkontaktnim. Tako magistrsko delo zajema raziskavo možnih brezkontaktnih načinov merjena debelin, zoženje njihovega izbora in testiranje merilnikov, ki delujejo na izbranih principih. Po opravljenem testiranju se izkaže, da nobeden od izposojenih merilnikov za dan problem ni primeren. Zato predlagam, da se ob nadaljevanju razvoja preizkusi več vrst merilnikov, ki za merjenje uporabljajo izbrane principe ob upoštevanih omejitvah in robnih pogojih, ugotovljenih skozi izdelavo tega dela.

Keywords

Unior;odkovek;debelina;kontrolna linija;merilni sistem;brezkontaktno merjenje;magistrske naloge;

Data

Language: Slovenian
Year of publishing:
Typology: 2.09 - Master's Thesis
Organization: UM FS - Faculty of Mechanical Engineering
Publisher: [P. Brglez]
UDC: 531.717.1.082.5(043.2)
COBISS: 161949187 Link will open in a new window
Views: 128
Downloads: 0
Average score: 0 (0 votes)
Metadata: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Other data

Secondary language: English
Secondary title: Development of an optical measuring system for measuring the thickness of forgings on the control line
Secondary abstract: The master's thesis was created in cooperation with the company Unior d.d. from Zreče. It originates from the problem of too rapid wear of the measuring system used to measure the thicknesses of the casings on the control line B1. Too little time until the measurement system is destroyed leads to costs, which are not only the costs of changing the measuring devices, but also the costs of reclamations, transport, and false emissions. With this aim in mind, I was asked to investigate alternative options that could replace the existing method of measurement with a non-contact one. Thus, the master’s thesis covers the research of possible non-contact methods of measuring thickness, narrowing down their selection and testing measuring devices that work on the selected principles. After testing, it turns out that none of the borrowed measuring devices are suitable for the given problem. Therefore, I suggest that, during the continuation of the development, several types of measuring devices are tested, which use the selected principles for measurement, considering the limitations and boundary conditions established during the production of this work.
Secondary keywords: forgings;thickness;control line;measuring system;non-contact measuring;
Type (COBISS): Master's thesis/paper
Embargo end date (OpenAIRE): 2026-06-05
Thesis comment: Univ. v Mariboru, Fak. za strojništvo, Proizvodne tehnologije in sistemi
Pages: 1 spletni vir (1 datoteka PDF (XIV, 85 f.))
ID: 18918072