diplomsko delo
Povzetek
Diplomsko delo je nastalo z namenom, da ugotovimo ali je mogoče star in že uporabljen les ponovno uporabiti in pretvoriti v produkte z visoko dodano vrednostjo. Zaradi bodoče stiske s kvalitetno surovino lesarji iščemo možnosti, kako čim bolje izkoristiti to surovino. Raziskave smo opravljali v sodelovanju s podjetjem M Sora, kjer veliko pozornosti posvečajo projektu ReWin, ki temelji na razvoju naprednih načinov uporabe odsluženega lesa. S tem se ukvarjajo že 5 let, in v tem obdobju so razvili nekaj izdelkov z visoko dodano vrednostjo. Projekt temelji na lesu iz starega kozolca, ki so ga pripravljeni čim bolje raziskati in izkoristiti. Naša naloga je bila določiti odpornost starega lesa proti navlaževanju, saj je to en odločilnejših faktorjev pri nadaljnji uporabi tega lesa. S tramov iz kozolca smo izdelali vzorce in jih pripravili za nadaljevanje dela. Zasnovali smo načrt preizkusov, ki smo jih opravili ter določili ustrezna časovna obdobja za izvajanje meritev. Ugotavljali smo gostoto, stični kot, sorpcijske lastnosti ter kratkotrajno in dolgotrajno navzemanje vode. Glede na to da so bili vzorci izdelani iz dveh različnih lesnih vrst smo po testiranju dobili precej podobne in kvalitetne rezultate, kar pomeni, da ima ves les, ki smo ga preizkušali primerljiv potencial za ponovno uporabo.
Ključne besede
odslužen les;ponovna uporaba;dodana vrednost;vlažnost;
Podatki
Jezik: |
Slovenski jezik |
Leto izida: |
2018 |
Tipologija: |
2.11 - Diplomsko delo |
Organizacija: |
UL BF - Biotehniška fakulteta |
Založnik: |
[A. Ambrožič] |
UDK: |
630*814 |
COBISS: |
2944393
|
Št. ogledov: |
599 |
Št. prenosov: |
198 |
Ocena: |
0 (0 glasov) |
Metapodatki: |
|
Ostali podatki
Sekundarni jezik: |
Angleški jezik |
Sekundarni naslov: |
Resistance to moisturizing of old wood from hay rack |
Sekundarni povzetek: |
The objective of this study is to find out whether recovered wood can be reused and converted into products with high added value. Wood scientists are exploring options how to obtain wood in different ways than usual, due to expected shortage of this high quality raw material in future. We carried out the research in cooperation with the company M Sora. They give a lot of attention to their ReWin project, which is based on the identification of better ways of using recovered wood. They have been active with the project for the last 5 years and have already made a number of reputed products. The project is based on wood from old hayrack, which is ready to be explored and used as best as possible. As one of the most decisive factors in further use of this wood was dampening due to moisture, our task was to determine the resistance of wood to moistening. We made samples from a hayrack's beams and prepared them for the continuation of the work. We have designed a plan of the tests that we have carried out and set the appropriate time periods for performing the measurements. We found out the density, contact angles, sorption properties and short-term as well as long-term water absorption. We obtained quite similar and high quality results after testing all the samples. Hence, considering the fact that the samples were made from two different types of wood, all the wood we tested have the same potential for being reused. |
Sekundarne ključne besede: |
odpornost;recovered wood;reuse;added value;density;resistance; |
Vrsta dela (COBISS): |
Diplomsko delo/naloga |
Študijski program: |
0 |
Komentar na gradivo: |
Univ. v Ljubljani, Biotehniška fak., Oddelek za lesarstvo |
Strani: |
VIII, 42 f. |
ID: |
10959858 |