diplomsko delo
Luka Železnik (Avtor), Tina Levec (Recenzent), Tomaž Lampe (Mentor)

Povzetek

IZVLEČEK Uvod: Diplomsko delo obravnava praktično uporabnost 3D skeniranja na področju tehnologije pripomočkov za ortotiko in protetiko. V nadaljevanju so predstavljene različne metode 3D skeniranja in tiskanja, njihove prednosti in slabosti ter tudi druga področja, kjer je 3D skeniranje nadvse uporabno. Na kratko je predstavljen pretekli razvoj tehnologije 3D ter izpostavljen možen prihodnji razvoj. Namen: Predstaviti pomen 3D skeniranja kot del digitalizacije človeškega telesa na področju ortotike in protetike. Cilj diplomskega dela predstavlja praktični prikaz in analiza uporabnosti 3D skeniranja na področju ortotike in protetike. Metode dela: Temelji na pregledu literature. Uporabljena metoda dela je teoretična, tj. študij literature. Pri pisanju naloge smo uporabili deskriptivno, opisno metodo dela in pa komparativno metodo dela. Gradivo smo iskali v spletnih bazah podatkov COBISS, MEDLINE, PubMed, DiKUL ter Google Scholar. Rezultati: Osrednji del predstavlja prikaz in analizo nekaterih praktičnih primerov 3D skeniranja na področju izdelave prilagojene ortotike in protetike za posameznega uporabnika oz. pacienta. Le-to smo uvrstili v poglavje Rezultati, kjer smo tudi navedli razlike med različnimi vrstami skenerjev, upoštevajoč seveda tiste, ki se uporabljajo v kliničnih okoljih. Razprava in zaključek: Zaključujemo z ugotovitvami, da ima 3D skeniranje na področju protetike in ortotike mnogo prednosti (z vidika dostopnosti, stroškov, uporabnosti, izdelave, inovativnosti), da zahteva vključenost in dobro sodelovanje različnih strokovnjakov, osvetlili pa smo tudi njihov možen prihodnji razvoj ter nekatera etična vprašanja, ki se ob tem porajajo.

Ključne besede

diplomska dela;ortotika in protetika;3D skenerji;tehnologija;trorazsežne tehnike skeniranja;3D modeliranje;3D tiskanje;3D skeniranje;

Podatki

Jezik: Slovenski jezik
Leto izida:
Tipologija: 2.11 - Diplomsko delo
Organizacija: UL ZF - Zdravstvena fakulteta
Založnik: [L. Železnik]
UDK: 617.3
COBISS: 5763179 Povezava se bo odprla v novem oknu
Št. ogledov: 684
Št. prenosov: 200
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Angleški jezik
Sekundarni naslov: Presentation and applaying [!] of 3D scanning techniques in ortotics [!] and prosthetics
Sekundarni povzetek: Introduction: Thesis is researching practical usability of 3D scanning technology in the field of orthopedic and prosthetic devices. Various 3D scanning and printing methods along with their advantages and disadvantages are being presented as well as other areas where 3D scanning is at most useful. Thesis also shortly presents past development of 3D technology and points out possible future development. Purpose: Present the importance of 3D scanning as part of digitization of human body in the field of prosthetics and orthotics. Aim of the thesis is to present practical demonstration and analysis of usability of 3D scanning in the field if orthotics and prosthetics. Methods: Paper is based on literature such as books, articles, magazines, web content, graphic material etc. Method used for this thesis is theoretical such as studying the literature. When writing this paper we have used descriptive and comparative method. We searched for material in online databases COBISS, MEDLINE, PubMed, DiKUL and Google Scholar. Results: Main part of the thesis is presenting demonstration and analysis of some practical examples of 3D scanning in the field of making adapted orthotics and prosthetics for an individual user or patient. This was inserted in chapter Results, where we have stated the differences between different scanner types, considering only those which are being used in clinical environments. Discussion and conclusion: Thesis was concluded with findings, that 3D scanning in the field of prosthetics and orthotics has many advantages (availability, costs, usefulness, manufacturing and innovation, etc.). It also requires inclusion and good cooperation of various experts and we have also shed a light to its possible future development along with some ethnic issues that arise.
Sekundarne ključne besede: diploma theses;orthotics and prosthetics;3D scanners;technology;three-dimensional scanning techniques;3D modeling;3D printing;3D scanning;
Vrsta dela (COBISS): Diplomsko delo/naloga
Študijski program: 0
Konec prepovedi (OpenAIRE): 1970-01-01
Komentar na gradivo: Univ. v Ljubljani, Zdravstvena fak., Oddelek za protetiko
Strani: 51 str.
ID: 11366543