pregled literature
Ana Rožanc (Avtor), Tina Levec (Recenzent), Andrijana Sever Škapin (Mentor), Tomaž Lampe (Komentor)

Povzetek

Uvod: V ortotiki in protetiki so za izdelavo tehničnih pripomočkov ključnega pomena materiali, ki jih inženirji uporabljajo pri svojem delu. Izberemo jih glede na njihove lastnosti in predvideno uporabo, pri čemer pa so odločilne individualne potrebe bolnika. Ortotiki in protetiki so odgovorni in usposobljeni za ustrezno izbiro materialov in sestavnih delov za izdelavo. Najbolj so v uporabi polimerni materiali, ki se delijo v tri večje skupine: termoplasti, duroplasti in elastomeri. Njihova pomembna lastnost je, da se lahko oblikuje preko mavčnega modela. V svetu obstaja veliko proizvajalcev polimernih materialov. Zaradi lažje in hitrejše prepoznave so jih poimenovali s komercialnimi imeni in jim pripravili navodila o uporabi. Namen: Namen diplomske naloge je predstaviti termoplastične materiale ter njihove kemijske in fizikalne lastnosti. V obliki tabel bomo prikazali primerjavo lastniških imen in lastnosti nekaterih polimernih materialov petih podjetij, ki so specializirana na področju ortotike in protetike in imajo možnost njihove dobave. Metode dela: Diplomsko delo temelji na deskriptivni metodi ter analizi ponudb materialov petih večjih dobaviteljev, ki so trenutno na tržišču na področju ortotike in protetike. Rezultati: v prvi tabeli so prikazane lastnosti opisanih materialov (gostota, temperatura obdelave in tališča ter kemijska formula), v vseh ostalih pa so analizirana imena in lastnosti (uporaba, temperatura obdelave) petih podjetij, ki jih dobavljajo. Razprava in sklep: Nekateri materiali se pojavljajo pod istimi lastniškimi imeni pri več dobaviteljih, v veliki večini pa se razlikujejo. Tudi vseh ne dobavljajo vsa podjetja, določeni materiali se lahko pridobijo le pri nekaterih podjetjih. S pregledom materialov različnih dobaviteljev in predstavitvijo le-teh v tabelah smo želeli na enem mestu zbrati pomembnejše informacije o termoplastih, ki se jih uporablja za izdelavo tehničnih pripomočkov. Iz tabel bomo lahko povezali lastniška imena s polimernim materialom in njegovimi lastnostmi.

Ključne besede

diplomska dela;ortotika in protetika;termoplasti;duroplasti;elastomeri;lastnosti;lastniška imena;

Podatki

Jezik: Slovenski jezik
Leto izida:
Tipologija: 2.11 - Diplomsko delo
Organizacija: UL ZF - Zdravstvena fakulteta
Založnik: [A. Rožanc]
UDK: 617.3
COBISS: 5307243 Povezava se bo odprla v novem oknu
Št. ogledov: 1232
Št. prenosov: 614
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Angleški jezik
Sekundarni naslov: Identification of proprietary names of polymer materials in different companies in orthotics and prosthetics
Sekundarni povzetek: Introduction: Crucial role in making technical accessories in orthotics and prosthetics is played by materials, which engineers use at their work. The materials are selected with regard to their properties and intended use, wherein a decisive factor is individual needs of a patient. Orthotists and prosthetists are responsible and educated for a suitable selection of materials and components. The most used are polymeric materials which are divided into three major groups: thermoplastics, thermosets and elastomers. Their important characteristic is the ability to be moulded in a plaster model. There are many manufacturers of polymeric materials worldwide. For making easier and faster distinction polymeric materials were named with commercial names and accompanied by instructions for use. Purpose: The aim of this diploma thesis is presentation of thermoplastic materials together with their chemical and phyisical properties. Additionally, we will use tables to show comparisons of proprietary names and characteristics of several polymeric materials produced by five companies, which are specialised in fields of orthotics and prosthetics, and are also able to supply them. Methods of work: The diploma thesis is based on a method of description as well as analysis of offers for materials formulated by five major suppliers, which currently dominate markets of orthotics and prosthetics. Results: In the first table properties of described materials (density, processing temperature, melting point and chemical formula) are shown, while in the remaining tables the names and properties (usage, temperature of processing) of polymeric materials of five suppliers are analysed. Discussion and conclusion: Some materials of different suppliers hold the same proprietary names, but a great majority of proprietary terms differs. Also, all included polymeric materials cannot be supplied by all companies, certain materials can be gained only by some of them. The overview of materials of various suppliers and their presentation in tables enabled us to collect important information on thermoplastics, which are used for making technical accessories. The tables allow us to connect proprietary names with polymeric materials and their characteristics.
Sekundarne ključne besede: diploma theses;orthotics and prosthetics;thermoplastics;thermosets;elastomers;properties;proprietary names;
Vrsta dela (COBISS): Diplomsko delo/naloga
Študijski program: 0
Komentar na gradivo: Dipl. delo (bolonjski študij), Univ. v Ljubljani, Zdravstvena fak., Oddelek za protetiko
Strani: 46 str.
ID: 10909633