carbonation and chloride penetration testing of alkali-activated concretes
Gregor J. G. Gluth (Avtor), Kamel Arbi (Avtor), Susan A. Bernal (Avtor), Dali Bondar (Avtor), Arnaud Castel (Avtor), Sundararaman Chithiraputhiran (Avtor), Siska L. A. Valcke (Avtor), Guang Ye (Avtor), Yibing Zuo (Avtor), John L. Provis (Avtor), Alireza Dehghan (Avtor), Katja Dombrowski-Daube (Avtor), Ashish Dubey (Avtor), Vilma Ducman (Avtor), Karl Peterson (Avtor), Penny Pipilikaki (Avtor)

Povzetek

Many standardised durability testing methods have been developed for Portland cement-based concretes, but require validation to determine whether they are also applicable to alkali-activated materials. To address this question, RILEM TC 247-DTA "Durability Testing of Alkali-Activated Materials" carried out round robin testing of carbonation and chloride penetration test methods, applied to five different alkali-activated concretes based on fly ash, blast furnace slag or metakaolin. The methods appeared overall to demonstrate an intrinsic precision comparable to their precision when applied to conventional concretes. The ranking of test outcomes for pairs of concretes of similar binder chemistry was satisfactory, but rankings were not always reliable when comparing alkali-activated concretes based on different precursors. Accelerated carbonation testing gave similar results for fly ash-based and blast furnace slag-based alkali-activated concretes, whereas natural carbonation testing did not. Carbonation of concrete specimens was observed to have occurred already during curing, which has implications for extrapolation of carbonation testing results to longer service life periods. Accelerated chloride penetration testing according to NT BUILD 443 ranked the tested concretes consistently, while this was not the case for the rapid chloride migration test. Both of these chloride penetration testing methods exhibited comparatively low precision when applied to blast furnace slag-based concretes which are more resistant to chloride ingress than the other materials tested.

Ključne besede

alkalijsko aktivirani materiali;karbonatizacija;prodor kloridov;Rilem TC;trajnost;alkali-activated materials (AAM);carbonatization;chloride penetration;durability;

Podatki

Jezik: Angleški jezik
Leto izida:
Tipologija: 1.01 - Izvirni znanstveni članek
Organizacija: ZAG - Zavod za gradbeništvo Slovenije
Založnik: E. & F. N. Spon, RILEM Publications
UDK: 620.1/.2
COBISS: 2552935 Povezava se bo odprla v novem oknu
ISSN: 1359-5997
Št. ogledov: 8
Št. prenosov: 1
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Slovenski jezik
Sekundarne ključne besede: alkalijsko aktivirani materiali;karbonatizacija;prodor kloridov;Rilem TC;trajnost;
Komentar vira: Article: 21;
Strani: str. 1-17
Letnik: ǂVol. ǂ53
Zvezek: ǂissue ǂ1
Čas izdaje: Feb. 2020
DOI: 10.1617/s11527-020-1449-3
ID: 19814397
Priporočena dela:
, carbonation and chloride penetration testing of alkali-activated concretes
, mix design and reproducibility of compressive strength of alkaliactivated concretes
, sulfate resistance, alkali-silica reaction and freeze-thaw resistance of alkali-activated concretes
, ni podatka o podnaslovu
, ni podatka o podnaslovu