mix design and reproducibility of compressive strength of alkaliactivated concretes
John L. Provis (Avtor), Kamel Arbi (Avtor), Susan A. Bernal (Avtor), Dali Bondar (Avtor), Anja Buchwald (Avtor), Arnaud Castel (Avtor), Sundararaman Chithiraputhiran (Avtor), Martin Cyr (Avtor), Alireza Dehghan (Avtor), Katja Dombrowski-Daube (Avtor), Ashish Dubey (Avtor), Vilma Ducman (Avtor), Gregor J. G. Gluth (Avtor), Sreejith Nanukuttan (Avtor), Karl Peterson (Avtor), Francisca Puertas (Avtor), Arie van Riessen (Avtor), Manuel Torres-Carrasco (Avtor), Guang Ye (Avtor), Yibing Zuo (Avtor)

Povzetek

The aim of RILEM TC 247-DTA Durability Testing of Alkali-Activated Materials is to identify and validate methodologies for testing the durability of alkali-activated concretes. To underpin the durability testing work of this committee, five alkali-activated concrete mixes were developed based on blast furnace slag, fly ash, and flash-calcined metakaolin. The concretes were designed with different intended performance levels, aiming to assess the capability of test methods to discriminate between concretes on this basis. A total of fifteen laboratories worldwide participated in this round robin test programme, where all concretes were produced with the same mix designs, from single-source aluminosilicate precursors and locally available aggregates. This paper reports the mix designs tested, and the compressive strength results obtained, including critical insight into reasons for the observed variability in strength within and between laboratories.

Ključne besede

alkalijsko aktivirani materiali;mehanske lastnosti;preskusne metode;Rilem TC;trajnost;alkali-activated materials (AAM);mechanical properties;test method;durability;

Podatki

Jezik: Angleški jezik
Leto izida:
Tipologija: 1.01 - Izvirni znanstveni članek
Organizacija: ZAG - Zavod za gradbeništvo Slovenije
Založnik: E. & F. N. Spon, RILEM Publications
UDK: 620.1/.2
COBISS: 2485607 Povezava se bo odprla v novem oknu
ISSN: 1359-5997
Št. ogledov: 3
Št. prenosov: 2
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Slovenski jezik
Sekundarne ključne besede: alkalijsko aktivirani materiali;mehanske lastnosti;preskusne metode;trajnost;
Komentar vira: Article: 99;
Strani: str. 1-13
Letnik: ǂVol. ǂ52
Zvezek: ǂissue ǂ5
Čas izdaje: Oct. 2019
DOI: 10.1617/s11527-019-1396-z
ID: 19929452
Priporočena dela:
, mix design and reproducibility of compressive strength of alkaliactivated concretes
, carbonation and chloride penetration testing of alkali-activated concretes
, sulfate resistance, alkali-silica reaction and freeze-thaw resistance of alkali-activated concretes
, ni podatka o podnaslovu
, ni podatka o podnaslovu