Primož Jelušič (Avtor), Tomaž Žula (Avtor)

Povzetek

An optimization model for reinforced concrete circular columns based on the Eurocodes is presented. With the developed optimization model, which takes into account the exact distribution of the steel reinforcement, which is not the case when designing with conventional column design charts, an optimal design for the reinforced concrete cross section is determined. The optimization model uses discrete variables, which makes the results more suitable for actual construction practice and fully exploits the structural capacity of the structure. A parametric study of the applied axial load and bending moment was performed for material cost and CO2 emissions. The results based on a single objective function show that the optimal design of the reinforced concrete column cross section obtained for the material cost objective function contains a larger cross-sectional area of concrete and a smaller area of steel compared with the optimization results when CO2 emissions are determined as the objective function. However, the optimal solution in the case where the material cost was assigned as the objective function has much more reserve in axial load capacity than in the optimal design where CO2 was chosen as the objective function. In addition, the multi-objective optimization was performed to find a set of solutions that provide the best trade-offs between the material cost and CO2 emission objectives.

Ključne besede

armiranobetonski stebri;krožni prerez;stroški;CO2 emisije;večkriterijska optimizacija;genetski algoritem;reinforced concrete columns;circular cross section;costs;CO2 emissions;multi-objective optimization;genetic algorithm;

Podatki

Jezik: Angleški jezik
Leto izida:
Tipologija: 1.01 - Izvirni znanstveni članek
Organizacija: UM FGPA - Fakulteta za gradbeništvo, prometno inženirstvo in arhitekturo
Založnik: MDPI
UDK: 691:004.42
COBISS: 161161475 Povezava se bo odprla v novem oknu
ISSN: 2071-1050
Št. ogledov: 7
Št. prenosov: 1
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Slovenski jezik
Sekundarne ključne besede: armiranobetonski stebri;krožni prerez;stroški;CO2 emisije;večkriterijska optimizacija;genetski algoritem;
Vrsta dela (COBISS): Članek v reviji
Strani: 19 str.
Letnik: ǂVol. ǂ15
Zvezek: ǂiss. ǂ15, [article no.] 11689
Čas izdaje: July 2023
DOI: 10.3390/su151511689
ID: 23435131