Jezik: | Slovenski jezik |
---|---|
Leto izida: | 2017 |
Tipologija: | 2.11 - Diplomsko delo |
Organizacija: | UL FGG - Fakulteta za gradbeništvo in geodezijo |
Založnik: | [A. Felc] |
UDK: | 624.046.5:691.421.2(497.4)(043.2) |
COBISS: | 8187745 |
Št. ogledov: | 936 |
Št. prenosov: | 487 |
Ocena: | 0 (0 glasov) |
Metapodatki: |
Sekundarni jezik: | Angleški jezik |
---|---|
Sekundarni naslov: | Design solution of a wall-slab connection detail for masonry building |
Sekundarni povzetek: | This thesis deals with the wall-slab connection detail in monolithic masonry buildings. It is presented on the case of a two storey building located in Beltinci. The masonry wall is made of hollow clay blocks filled with mineral wool insulation. This type of masonry has good energy efficiency and does not need additional thermal insulation. In usual masonry constructions the support length of a reinforced concrete slab is equal to the wall thickness which leads to appearance of a thermal bridge. This thesis presents thermal optimization of the wall-slab-junction which is achieved by reducing the bearing length of the slab. The criteria for determining connection detail is based on prevention of the condensation and mold growth on inner surface of the wall and by limiting the value of the linear thermal bridge coefficient. In the second part of the thesis the load-bearing capacity of the vertically loaded wall is checked using a numerical finite element model that was prepared in the program SAP2000. The results of the numerical analysis show that the proposed connection detail adequately sustain applied loads. |
Sekundarne ključne besede: | graduation thesis;civil engineering;masonry;thermal bridge;joint detail;condensation;slab;wall;load capacity; |
Vrsta dela (COBISS): | Diplomsko delo/naloga |
Študijski program: | 0 |
Komentar na gradivo: | Univ. v Ljubljani, Fak. za gradbeništvo in geodezijo |
Strani: | VIII, 29 str. |
ID: | 10910837 |