diplomsko delo
David Simonič (Avtor), Saša Petriček (Mentor)

Povzetek

Eden od problemov načrtovanja fuzijske elektrarne je izbira materialov, ki bodo zdržali ekstremne pogoje bližine plazme. Primeren material bi bili lahko volframovi kompoziti. V čistem volframu pri visokih temperaturah poteka proces rekristalizacije, ki jo spremlja rast zrn, kar vodi do poslabšanja mehanskih lastnosti materiala. Potencialna rešitev je kompozit volframa z delci divolframovega karbida (W2C), ki omejijo rast volframovih zrn in s tem zavrejo rekristalizacijo. Pri diplomskem delu sem pripravil štiri zmesi prahov volframa in volframovega karbida (WC) različnih koncentracij. Vzorce sem zgostil s pomočjo tehnike SPS. Z SEM smo analizirali mikrostrukturo in z XRD fazno sestavo vzorcev. Trdoto pripravljenih vzorcev sem primerjal s trdoto istih vzorcev, ki so bili starani. Trdota kompozitov z večjim deležem W2C je višja. Trdota vzorcev pred staranjem in po staranju pri vseh temperaturah je enaka, zato sklepamo, da rekristalizacija med staranjem pri izbranih pogojih ni potekla.

Ključne besede

volfram;volframov karbid;kompoziti;rekristalizacija;sintranje;staranje;trdota;diplomska dela;

Podatki

Jezik: Slovenski jezik
Leto izida:
Tipologija: 2.11 - Diplomsko delo
Organizacija: UL FKKT - Fakulteta za kemijo in kemijsko tehnologijo
Založnik: [D. Simonič]
UDK: 546.78:620.1(043.2)
COBISS: 1538422467 Povezava se bo odprla v novem oknu
Št. ogledov: 663
Št. prenosov: 186
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Angleški jezik
Sekundarni naslov: Influence of ageing on hardness of tungsten and tungsten composites with tungsten carbide
Sekundarni povzetek: One of the problems with designing fusion power plant is the choice of materials that will withstand extreme conditions in proximity of plasma. Suitable materials for this application could be tungsten composites. Pure tungsten starts to recrystallize at high temperatures, where grain growth occurs, and that leads to a deterioration of the mechanical properties of the material. A potential solution is a tungsten composite with ditungsten carbide (W2C) particles that limit the growth of tungsten grains and thus inhibit recrystallization. In my thesis I prepared four mixtures of tungsten and tungsten carbide (WC) powders of different concentrations. The samples were densified using the SPS technique. Microstructure was analyzed using SEM and the phase composition of the samples was determined using XRD. Hardness of the prepared samples was compared with the hardness of the same samples that were aged. The hardness of composites with higher W2C content is higher. The hardness of the specimens before and after aging at all temperatures is the same, so we can conclude that recrystallization in our samples did not occur under the selected conditions during aging.
Sekundarne ključne besede: tungsten;tungsten carbide;composite;recrystallization;ageing;hardness;
Vrsta dela (COBISS): Diplomsko delo/naloga
Študijski program: 1000373
Konec prepovedi (OpenAIRE): 1970-01-01
Komentar na gradivo: Univ. v Ljubljani, Fak. za kemijo in kemijsko tehnologijo, UNI Kemija
Strani: 27 str.
ID: 11221119