magistrsko delo št.: 144/II. GR
Matej Lenarčič (Avtor), Matjaž Dolšek (Mentor), Anže Babič (Komentor)

Povzetek

V magistrskem delu analiziramo vpliv delovne različice novega standarda Evrokod 8 na potresnoodpornost reprezentativne armiranobetonske stavbe, ki je že bila sprojektirana v skladu z obstoječo različico Evrokoda 8. Učinke standardov ovrednotimo tako, da konstrukcijo obravnavane stavbe ponovno sprojektiramo z upoštevanjem zahtev delovne različice novega standarda in ocenimo njeno potresno odpornost. V prvem delu predstavimo nosilno konstrukcijo obravnavane stavbe, geometrijo, material, modeliranje vplivov in konstrukcije ter prikažemo armaturne načrte konstrukcije, sprojektirane po obstoječi različici standarda. V drugem delu opišemo novosti pri dimenzioniranju, ki jih prinaša delovna različica novega standarda. Nato nosilno konstrukcijo ponovno sprojektiramo na projektni potresni vpliv in rezultate projektiranja predstavimo v obliki armaturnih načrtov. V zadnjem delu primerjamo potresno odpornost obravnavanih stavb. Za obe konstrukciji stavbe definiramo nelinearen model, izvedemo potisno analizo in s pomočjo metode N2 določimo vrednost pospeška tal, ki povzroči mejno stanje blizu porušitve. Vpliv potresne obtežbe modeliramo na dva različna načina, z upoštevanjem Evrokodovega elastičnega spektra in z uporabo spletne aplikacije za napovedovanje IDA krivulj. Ker smo novo konstrukcijo projektirali za razred duktilnosti DC2, so projektne potresne obremenitve večje, kar je posledica nižjega faktorja obnašanja. Posledično je večja tudi količina računsko potrebne armature. Nosilnost nove konstrukcije je zato večja, deformacijska kapaciteta pa se ne spremeni bistveno. Zato je potresna odpornost obravnavanih različič stavbe v smislu mejnega pospeška tal približno enaka. Na osnovi rezultatov potresnih analiz lahko sklenemo, da delovna različica novega standarda Evrokod 8 ne prinaša bistvenih razlik na potresno odpornost obravnavane stavbe, pri pogoju, da se nova karta projektnega pospeška tal v prihodnosti ne bo bistveno spremenila.

Ključne besede

gradbeništvo;magistrska dela;GR;Evrokod 8;potresnoodporno projektiranje;armiran beton;pospešek tal;mejno stanje blizu porušitve;potisna analiza;N2 metoda;

Podatki

Jezik: Slovenski jezik
Leto izida:
Tipologija: 2.09 - Magistrsko delo
Organizacija: UL FGG - Fakulteta za gradbeništvo in geodezijo
Založnik: [M. Lenarčič]
UDK: 624.042.7:006.8(043.3)
COBISS: 32113411 Povezava se bo odprla v novem oknu
Št. ogledov: 823
Št. prenosov: 340
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Angleški jezik
Sekundarni naslov: Comparison of earthquake resistance of a reinforced concrete building designed according to the existing and new version of the Eurocode 8 standard
Sekundarni povzetek: In the master thesis, we analyse the impact of the working version of the new Eurocode 8 standard on the earthquake-resistance of a representative reinforced concrete building, which has already been designed according to Eurocode 8 standard. The effects of standards are evaluated by redesigning the building structures requirements of the working version of the new standard. In the first part, we present the load-bearing structure of the analysed building, geometry, materials and the modelling of the building and loads. Drawings of the reinforcement designed according to the existing version of Eurocode 8 standard are also shown. In the second part, we describe novelties in the design that are introduced in the working version of the new standard. The structure is then redesigned for the seismic design loads, and the design results are presented by reinforcement drawings. In the last part of the thesis, the earthquake resistance of both buildings is compared. For each building structure, a non-linear model is defined, pushover analysis is performed, and the peak ground acceleration that causes the nearcollapse limit state is estimated with the N2 method. The effect of seismic action is modelled in two ways, by considering the Eurocode elastic acceleration spectrum and by using the web-based methodology for the prediction of approximate IDA curves. Because we designed the new structure for the ductility class DC2, the seismic design loads were increased due to the lower behaviour factor. As a result, the amount of calculated reinforcement is also increased. The load-bearing capacity of the new structure is, therefore, higher, but the deformation capacity does not change significantly. Thus, the earthquake resistance of the new building, if expressed in terms of ultimate peak ground acceleration, is approximately equal to that designed according to Eurocode 8. Based on the results of seismic analyses, we can conclude that the working version of the new Eurocode 8 standard does not affect the seismic resistance of the analysed building significantly, provided that the seismic design maps will not change considerably in the future.
Sekundarne ključne besede: civil engineering;master thesis;Eurocode 8;design for earthquake resistance;reinforced concrete;ground acceleration;near collapse limit state;pushover analysis;N2 method;
Vrsta dela (COBISS): Magistrsko delo/naloga
Študijski program: 0
Konec prepovedi (OpenAIRE): 1970-01-01
Komentar na gradivo: Univ. v Ljubljani, Fak. za gradbeništvo in geodezijo
Strani: XII, 89 str.
ID: 11828944