Experimental and numerical heat transfer analysis of heat-pipe-based CPU coolers and performance optimization methodology
Povzetek
This paper presents an experimental and numerical heat transfer analysis of heat-pipe-based CPU coolers and a performance optimization methodology. The first part of the study focuses on the performance of two commercial HP-based CPU coolers under inclination angles of 0°, 90° and 180°. The results show that the 90° orientation provides the best thermal performance. The influence of heat pipe orientation on the performance of the entire system is obscured due to the much higher thermal resistance on the air-side of the cooler. A fourfold increase in air volumetric flow rate has only a minor effect on the cooling performance enhancement with a reduction of the thermal resistance from 0.11 K W [sup minus] 1 to 0.074 K W [sup minus] 1 at the highest heating power. In the second part of the study, heat transfer numerical simulations of the finned part of a cooler were performed and validated using experimental results. The output of the simulation is a 2-D temperature field, which is used as an input for the optimization methodology based on fin effectiveness and fin efficiency. Optimizing the fin geometry by removing unnecessary material yielded a 23% increase of the fin efficiency and decreased the weight of a fin by approx. 30%, proving the usefulness of the proposed methodology, which helps reduce costs, weight and development time of finned HP-based coolers.
Ključne besede
thermal management;heat exchangers;heat pipes;extended surfaces;CFD simulations;optimization methodology;
Podatki
| Jezik: | Angleški jezik |
|---|---|
| Leto izida: | 2020 |
| Tipologija: | 1.01 - Izvirni znanstveni članek |
| Organizacija: | UL FS - Fakulteta za strojništvo |
| UDK: | 519.8:536.2(045) |
| COBISS: |
23178243
|
| ISSN: | 1359-4311 |
| Št. ogledov: | 956 |
| Št. prenosov: | 616 |
| Ocena: | 0 (0 glasov) |
| Metapodatki: |
|
Ostali podatki
| Sekundarni jezik: | Slovenski jezik |
|---|---|
| Sekundarne ključne besede: | prenos toplote;prenosniki toplote;toplotne cevi;razširjene površine;CFD simulacije;optimizacijska metodologija; |
| Vrsta dela (COBISS): | Članek v reviji |
| Strani: | str. 1-14 |
| Zvezek: | ǂVol. ǂ179 |
| Čas izdaje: | Oct. 2020 |
| DOI: | 10.1016/j.applthermaleng.2020.115720 |
| ID: | 11909993 |
Priporočena dela:
Experimental and numerical heat transfer analysis of heat-pipe-based CPU coolers and performance optimization methodology
2020,
ni podatka o podnaslovu
Rekonstrukcija kondenzatorja
2001,
diplomsko delo
Termotehnični izračun cevnega prenosnika toplote
1998,
diplomsko delo visokošolskega strokovnega študija
Rekonstrukcija prenosnika toplote
1998,
diplomska naloga visokošolskega strokovnega študijskega programa
Termohidravlični izračun ploščnega prenosnika toplote
1998,
diplomsko delo visokošolskega strokovnega študija