Luka Lorbek (Avtor), Tomaž Katrašnik (Avtor), Andrej Kitanovski (Avtor)

Povzetek

Capillary tube models frequently rely on friction factor correlations, which are functions of the Reynolds number, and the tube's relative surface roughness. However, this study shows that explicitly correlating the friction factor with the relative surface roughness is unnecessary, at least when the latter is lower than 0.0025. To test this a correlation was fitted directly onto friction factor measurements obtained in an adiabatic flow of R600a, through nine capillary tubes from three manufacturers. The friction factor was correlated exclusively as a function of the Reynolds number, meaning that the impacts of the relative surface roughnesses on the friction factor were averaged, and included only implicitly. This correlation, and an existing correlation, which allows the specification of the relative surface roughness, were then implemented in a capillary tube model. The accuracy of the capillary tube model, using either the developed or existing correlation was then evaluated by comparing the results to experimental data. No significant decrease in the accuracy of the model was observed when the relative surface roughnesses, ranging from 0.0012 to 0.0025, were not individually specified for each capillary tube. To further verify this, the procedure was repeated on a larger database of friction factor and mass flow rate measurements, which also consisted of data from independent studies. Similar conclusions were drawn, as the average accuracy of the model differed only by 1 to 3% among different studies, and not always in favor of the correlation where the relative surface roughnesses could be specified.

Ključne besede

vapor-compression system;refrigerant flow;capillary tubes;relative surface roughness;friction factor correlation;

Podatki

Jezik: Angleški jezik
Leto izida:
Tipologija: 1.01 - Izvirni znanstveni članek
Organizacija: UL FS - Fakulteta za strojništvo
UDK: 621.56:519.8(045)
COBISS: 61519619 Povezava se bo odprla v novem oknu
ISSN: 0140-7007
Št. ogledov: 349
Št. prenosov: 22
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Slovenski jezik
Sekundarne ključne besede: parno-kompresijski sistemi;tok hladiva;kapilarne cevi;relativna hrapavost;faktor trenja;
Vrsta dela (COBISS): Članek v reviji
Konec prepovedi (OpenAIRE): 2023-09-01
Strani: str. 194-203
Zvezek: ǂVol. ǂ129
Čas izdaje: Sep. 2021
DOI: 10.1016/j.ijrefrig.2021.04.022
ID: 13088991