Jaka Mur (Avtor), Jaka Petelin (Avtor), Jörg Schille (Avtor), Udo Loeschner (Avtor), Rok Petkovšek (Avtor), Jaka Mur (Avtor), Jaka Petelin (Avtor), Jörg Schille (Avtor), Udo Loeschner (Avtor), Rok Petkovšek (Avtor)

Povzetek

Modern electronics facilitate the need for fast, efficient, and reliable methods for direct laser-based surface engineering of conductive thin film materials on flexible substrates. Recent advances in pulsed laser source development only incrementally increased the processing speeds, as those are limited by the available scanning systems. Our goal was to combine a high pulse repetition frequency high-power pulse-on-demand fiber laser source with an ultra-fast resonant scanner to achieve high throughput surface engineering. The enabling factor to compensate a resonant scannerʼs sinusoidal movement were the laserʼs intrinsic pulse-on-demand capabilities beyond simple pulse picking solutions. he high temporal resolution at full laser power was exploited for spatially controlled surface texturing, allowing a minimally 3 [micro]m positioning accuracy throughout the scannerʼs range at up to 60 m/s scan speed with a 10 [micro]m laser spot size. We applied the setup to processing of ITO and metallic films on flexible substrates for touchscreens, position sensors, or EM shielding. Surface modification and patterning of the conductive layer was successfully demonstrated while keeping the underlying surface intact. We employed a simple laser ablation model in comparison to the experimental data to improve the understanding of the ablation process. The resulting surface topography was observed and analysed.

Ključne besede

ultra-fast laser processing;surface engineering;intrinsic pulse-on-demand;resonant scanning;

Podatki

Jezik: Angleški jezik
Leto izida:
Tipologija: 1.01 - Izvirni znanstveni članek
Organizacija: UL FS - Fakulteta za strojništvo
UDK: 621.7.015:621.375.826(045)
COBISS: 17002523 Povezava se bo odprla v novem oknu
ISSN: 0169-4332
Št. ogledov: 270
Št. prenosov: 96
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Slovenski jezik
Sekundarne ključne besede: laserska obdelava;ultrakratki pulzi;površinski pojavi;pulz na zahtevo;resonančno skeniranje;
Vrsta dela (COBISS): Članek v reviji
Strani: str. 1-7
Zvezek: ǂVol. ǂ509
Čas izdaje: Apr. 2020
DOI: 10.1016/j.apsusc.2019.144911
ID: 13116222