Barbara Šubic (Avtor), Gorazd Fajdiga (Avtor), Jože Lopatič (Avtor)

Povzetek

Modern architecture suggests the use of opened spaces with large transparent envelope surfaces. Therefore, windows of long widths and large heights are needed. In order to withstand the wind loads, such wooden windows can be reinforced with stiffer materials, such as aluminium (Al), glass-fibre reinforced polymer (GFRP), and carbon-fibre reinforced polymer (CFRP). The bending stiffness, load-bearing capacity, and flexural rigidity of hybrid beams, reinforced with aluminium, were compared through experimental analysis, using a four-point bending tests method, with those of reference wooden beams. The largest increases in bending stiffness (29%-39%), load-bearing capacity (33%-45%), and flexural rigidity (43%-50%) were observed in the case of the hybrid beams, with the highest percentage of reinforcements (12.9% six reinforcements in their tensile and six reinforcements in their compressive zone). The results of the experiments confirmed the high potential of using hybrid beams to produce large wooden windows, for different wind zones, worldwide.

Ključne besede

lesni kompoziti;lesena okna;hibridni leseni nosilci;upogibna togost;ojačitve iz aluminija;wood based composites;hybrid beams;bending stiffness;flexural rigidity;aluminium reinforcements;wooden windows;

Podatki

Jezik: Angleški jezik
Leto izida:
Tipologija: 1.01 - Izvirni znanstveni članek
Organizacija: UL BF - Biotehniška fakulteta
UDK: 630*8
COBISS: 2967433 Povezava se bo odprla v novem oknu
ISSN: 1999-4907
Št. ogledov: 210
Št. prenosov: 65
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Slovenski jezik
Sekundarne ključne besede: lesni kompoziti;lesena okna;hibridni leseni nosilci;upogibna togost;ojačitve iz aluminija;
Vrsta dela (COBISS): Znanstveno delo
Strani: 16 str.
Letnik: ǂVol. ǂ9
Zvezek: ǂiss. ǂ11
Čas izdaje: 2018
DOI: 10.3390/f9110703
ID: 13682528