Moisture performance of façade elements made of thermally modified Norway spruce wood

Miha Humar (Avtor), Boštjan Lesar (Avtor), Davor Kržišnik (Avtor)

Povzetek

Wooden façades are gaining in importance. Thermally modified wood is becoming one of the preferred materials for claddings. In spite of the fact that façades made of thermally modified wood have been in use for more than two decades, reports about long-term monitoring have been sparse. The results of three-year monitoring of a façade made of thermally modified wood in Ljubljana are reported. Moisture content measurements of thermally modified façades were taken at 22 locations and compared to the moisture content of untreated Norway spruce wood. Temperature and relative humidity were recorded in parallel. The moisture content of the wood was compared to the average relative humidity before the measurements. The results confirm the lower moisture content of thermally modified wood in comparison to reference Norway spruce. The moisture content of the wooden façade could be best correlated with the average relative humidity and temperature 48 h before the wood moisture content measurement was taken.

Ključne besede

termično modificiran les;fasadne obloge;obnašanje;sorpcijske lastnosti;odpornost proti navlaževanju;thermally modified wood;cladding;performance;sorption properties;water exclusion efficacy;

Podatki

Jezik:	Angleški jezik
Leto izida:	2020
Tipologija:	1.01 - Izvirni znanstveni članek
Organizacija:	UL BF - Biotehniška fakulteta
UDK:	630*8
COBISS:	3181193
ISSN:	1999-4907
Št. ogledov:	268
Št. prenosov:	101
Ocena:	0 (0 glasov)
Metapodatki:

Ostali podatki

Sekundarni jezik:	Slovenski jezik
Sekundarne ključne besede:	termično modificiran les;fasadne obloge;obnašanje;sorpcijske lastnosti;odpornost proti navlaževanju;
Vrsta dela (COBISS):	Članek v reviji
Strani:	str. 1-13
Letnik:	ǂVol. ǂ11
Zvezek:	ǂiss. ǂ3
Čas izdaje:	2020
DOI:	10.3390/f11030348
ID:	14021179