Povzetek
Surface treatment of 3D-printed objects with coatings, besides protection against environmental influences, offers the improvement of visual appearance of the printed elements. In order to design an optimum surface system, the physical and chemical properties of polymers surfaces should be well-known. In the present study, 3D-printed samples of acrylonitrile-butadiene-styrene, poly(lactic acid) and poly(lactic acid) with wood flour additive were coated with three different types of coating, namely solvent borne alkyd coating, water borne acrylic coating and coating made of acrylonitrile-butadiene-styrene diluted in acetone. The surface properties of substrates and the properties of surface systems were assessed with different methods. The results revealed the surfaces of polymers having hydrophobic character, whereas the color, gloss, surface roughness and coating film thickness of coated surfaces depend on the characteristics of particular coatings. Finally, the adhesion of coatings was shown to be appropriate, but dependent on substrate surface porosity and chemical properties of both substrate surface and coating asset.
Ključne besede
acrylonitrile-butadiene-styrene;coatings;fused deposition modeling;polymers;wood;
Podatki
Jezik: |
Angleški jezik |
Leto izida: |
2020 |
Tipologija: |
1.01 - Izvirni znanstveni članek |
Organizacija: |
UL BF - Biotehniška fakulteta |
UDK: |
62 |
COBISS: |
39680515
|
ISSN: |
2073-4360 |
Št. ogledov: |
180 |
Št. prenosov: |
81 |
Ocena: |
0 (0 glasov) |
Metapodatki: |
|
Ostali podatki
Sekundarni jezik: |
Slovenski jezik |
Sekundarne ključne besede: |
akrilonitril-butadien-stiren;površinska obdelava;polimeri;les; |
Vrsta dela (COBISS): |
Članek v reviji |
Strani: |
str. 1-14 (2797) |
Letnik: |
ǂVol. ǂ12 |
Zvezek: |
ǂno. ǂ2 |
Čas izdaje: |
2020 |
DOI: |
10.3390/polym12122797 |
ID: |
14373093 |