S. Omprakasam (Avtor), Kathiresan Marimuthu (Avtor), R. Raghu (Avtor), T. Velmurugan (Avtor)

Povzetek

This current research focuses on optimizing the welding process parameters and penetration of 5052 alloys using a TIG welding process based on the Taguchi methods. Process parameters such as current, voltage, and speed with three different levels were taken to form the L27 orthogonal array using the design of experiments. Analysis of variance, signal-to-noise ratio analysis, and regression analysis were performed. The regression analysis indicated that the developed model has greater adequacy in predicting the reinforcement form factor (RFF), penetration shape factor (PSF) and hardness of the weld specimens. In addition, the optimized parametric condition for the welded specimen was found to be current, voltage, and speed of 140 A, 18 V, and 300 mm/min, respectively.

Ključne besede

TIG welding;aluminium;5052 alloys;hardness;reinforcement form factor;penetration shape factor;Taguchi methods;

Podatki

Jezik: Angleški jezik
Leto izida:
Tipologija: 1.01 - Izvirni znanstveni članek
Organizacija: UL FS - Fakulteta za strojništvo
UDK: 621.791
COBISS: 105891331 Povezava se bo odprla v novem oknu
ISSN: 0039-2480
Št. ogledov: 92
Št. prenosov: 45
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Slovenski jezik
Sekundarni naslov: Statistično modeliranje in optimizacija parametrov varjenja po postopku TIG z metodo Taguchi
Sekundarne ključne besede: TIG varjenje;aluminij;zlitina AA5052;trdota;metoda Taguchi;faktor oblike ojačitve;faktor oblike prevaritve;
Vrsta dela (COBISS): Članek v reviji
Strani: str. 200-209
Letnik: ǂVol. ǂ68
Zvezek: ǂno. ǂ3
Čas izdaje: Mar. 2022
DOI: 10.5545/sv-jme.2021.7414
ID: 15163251