Jože Arbeiter (Avtor), Maja Vončina (Avtor), Barbara Šetina (Avtor), Jože Medved (Avtor)

Povzetek

Within the scope of this research the transformation of the Al$_6$Fe metastable phase was analyzed via Differential Scanning Calorimetry (DSC), optical and Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD). A binary Al-Fe1.1 low-impurity alloy was produced with refined raw materials in a controlled environment. With a cooling rate of 35 K/s, solidification of the Al$_6$Fe metastable phase was achieved. The samples were homogenized at 600 °C for 2–24 h. Results of a qualitative analysis of metallographic samples show that the transformation began on grain boundaries, forming an Fe-phase free region, but after 2 h began to take place within the eutectic region. The transformation is mostly complete after 12 h, but after 24 h of homogenization it is fully complete as all samples, except the 24 h homogenized one, contain both the metastable Al$_6$Fe and the stable Al$_{13}$Fe$_4$ phase.

Ključne besede

homogenization;aluminum alloys;phase transformation;differential scanning calorimetry;

Podatki

Jezik: Angleški jezik
Leto izida:
Tipologija: 1.01 - Izvirni znanstveni članek
Organizacija: UL NTF - Naravoslovnotehniška fakulteta
UDK: 669
COBISS: 86912003 Povezava se bo odprla v novem oknu
ISSN: 1996-1944
Št. ogledov: 99
Št. prenosov: 37
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Vrsta dela (COBISS): Članek v reviji
Strani: str. 1-9
Letnik: ǂVol. ǂ14
Zvezek: ǂiss. ǂ23
Čas izdaje: 2021
DOI: 10.3390/ma14237208
ID: 15337731