Sinteza in karakterizacija hidrogelov, sintetiziranih iz celuloze

magistrsko delo

Jan Hočevar (Avtor), Jernej Iskra (Mentor), Miha Lukšič (Član komisije za zagovor), Romana Cerc Korošec (Član komisije za zagovor)

Povzetek

V prvem delu magistrskega dela sem raziskoval zamreževanje komercialne natrijeve soli karboksimetil celuloze z uporabo različnih zamreževalnih reagentov na osnovi naravnih dikarboksilnih kislin z različnimi dolžinami verig (citronska kislina, jantarna kislina in jabolčna kislina) ter 2,5-furandikarboksilne kisline, ki so sintetizirane iz biomase. Reakcije zamreževanja so bile izvedene pod različnimi pogoji (reakcijski čas in temperatura sušenja ter različna množinska razmerja med celuloznim derivatom in uporabljenim zamreževalnim reagentom). S pomočjo infrardeče spektroskopije in termogravimetrične analize so bili določeni najboljši pogoji zamreževanja, na podlagi katerih so bile reakcije zamreževanja celuloznega derivata prenesene na večjo skalo. Ugotovljeno je bilo, da so lastnosti hidrogelov odvisne od časa sušenja in koncentracije zamreževalnega reagenta. Hidrogel z najvišjo stopnjo absorpcije vode dobimo pri uporabi 10-odstotnega zamreževalnega reagenta. V tem primeru znaša stopnja absorpcije vode 54 %, kar je približno 10 % (m/m) več kot v primeru komercialnega hidrogela, ki je imel 45-odstotno stopnjo absorpcije vode. V drugem delu magistrskega dela sem študiral reakcije zamreževanja neposredno na nativni celulozni vlaknini. Primarno so bili pri reakcijah zamreževanja uporabljeni kislinski kloridi alifatskih karboksilnih kislin z različnimi dolžinami alifatskih verig (sukcinil, adipoil, suberoil in sebakoil diklorid). Na ta način je bil raziskan vpliv razdalje med posameznimi zamreženimi celuloznimi verigami na stopnjo absorpcije vode. Slednje je neposredno povezano tudi z velikostjo 3D-praznin, v katere se vežejo molekule vode. Reakcijski čas zamreževanja celuloze, temperatura zamreževanja in množinsko razmerje med celulozo in zamreževalnim reagentom so bili optimizirani. V nadaljevanju so bile reakcije zamreževanja izvedene tudi neposredno z dikarboksilnimi kislinami in ustreznimi anhidridi. Primerjal sem potek reakcij in lastnosti sintetiziranih hidrogelov pri uporabi različnih zamreževalnih reagentov. S pomočjo različnih analiznih tehnik je bil definiran optimalni zamreževalni reagent oziroma optimalni pogoji zamreževanja in reakcijo zamreževanja celulozne vlaknine sem prenesel na večje merilo. Rezultati so pokazali, da ima na lastnosti hidrogelov na osnovi celuloze največji vpliv množinsko razmerje med celulozo in uporabljenim zamreževalnim reagentom. V primeru nižjih količin zamreževalnih reagentov in posledično nižje stopnje zamreženja pride do izboljšanja absorpcijskih lastnosti napram absorpcijskim lastnostim celuloze. Zelo dobre absorpcijske lastnosti dosežemo v primeru, ko celulozo zamrežimo z nižjo množino zamreževalnega reagenta in jo nato še dodatno modificiramo s sukcinskim anhidridom. Delež vezane vode v tem primeru znaša okoli 44 % glede na maso suhega hidrogela, kar je primerljivo z lastnostmi komercialnega hidrogela. Najboljše absorpcijske lastnosti dosežemo v primeru modifikacije celuloze s sukcinsko kislino v mediju, sestavljenem iz N,N-dimetilacetamida in litijevega klorida. Pri omenjenem hidrogelu znaša stopnja absorpcije vode 70 %.

Ključne besede

celulozna vlakna;celulozni derivati;hidrogeli na osnovi celuloze;termogravimetrija;analiza hidrogelov;magistrska dela;

Podatki

Jezik:	Slovenski jezik
Leto izida:	2022
Tipologija:	2.09 - Magistrsko delo
Organizacija:	UL FKKT - Fakulteta za kemijo in kemijsko tehnologijo
Založnik:	[J. Hočevar]
UDK:	547.458.81(043.2)
COBISS:	123546627
Št. ogledov:	37
Št. prenosov:	13
Ocena:	0 (0 glasov)
Metapodatki:

Ostali podatki

Sekundarni jezik:	Angleški jezik
Sekundarni naslov:	Synthesis and characterization of cellulose-based hydrogels
Sekundarni povzetek:	The first part of my master's thesis investigates crosslinking syntheses of commercial carboxymethylcellulose sodium salt using different crosslinking reagents based on natural dicarboxylic acids of different chain length (citric acid, succinic acid, malic acid) and 2,5-furandicarboxylic acid as molecules from biomass. The crosslinking reactions were carried out under different conditions (reaction time and drying temperature as well as different molar ratios between the cellulose derivative and the crosslinking reagent). Infrared spectroscopy and thermogravimetric analysis were carried out to determine the best crosslinking conditions, and cellulose derivative crosslinking reactions were transferred to a larger scale. It was found that properties of hydrogels depended on drying time and concentration of the crosslinking reagent. The hydrogel with the highest water absorption rate is obtained when 10 wt % of the crosslinking reagent is used. In this case, the water absorption rate was 54%, which is approximately 10% more than that of the commercial hydrogel with a water absorption rate of 45%. In the second part of my master's thesis, crosslinking reactions directly on native cellulose fibers were studied. Primarily, acid chlorides of aliphatic carboxylic acids with different aliphatic chain lengths (succinyl-, adipoyl-, suberoyl- and sebacoyl-dichloride) were used to carry out the crosslinking reactions. In this way, the influence of the distance between individual cross-linked cellulose chains on the degree of water absorption was investigated. This is also directly related to the size of 3D spaces to which water molecules bind. The reaction time of cellulose crosslinking, the crosslinking temperature, and the ratio between cellulose and the crosslinking reagent were optimized. In addition, crosslinking reactions were also performed directly with dicarboxylic acids and anhydrides. Reactions and properties of the hydrogels synthesized using different crosslinking reagents were compared. Various analytical techniques were used to determine the optimal crosslinking reagent or optimal crosslinking conditions, and the crosslinking reaction of cellulose fibers was transferred to a larger scale. The results showed that the properties of cellulose-based hydrogels have the greatest influence on the mass ratio between cellulose and the crosslinking reagent used. With lower amounts of crosslinking reagents and consequently a lower degree of crosslinking, absorption properties, compared to those of cellulose, improve. The best absorption properties were achieved when cellulose was crosslinked with a lower amount of the crosslinking reagent and then additionally modified with succinic anhydride. In this case, the proportion of bound water was about 44%, based on the weight of the dry hydrogel, which is comparable to the properties of a commercial hydrogel. The best absorption properties are obtained when cellulose is modified with succinic acid in a medium comprising N,N-dimethylacetamide and lithium chloride. The hydrogel has a water absorption rate of 70%.
Sekundarne ključne besede:	cellulose fibers;cellulose derivatives;cellulose-based hydrogels;thermogravimetry;hydrogel analysis;Celuloza;Univerzitetna in visokošolska dela;
Vrsta dela (COBISS):	Magistrsko delo/naloga
Študijski program:	1000375
Konec prepovedi (OpenAIRE):	1970-01-01
Komentar na gradivo:	Univ. v Ljubljani, Fak. za kemijo in kemijsko tehnologijo, smer Kemija
Strani:	XIV, 115 str.
ID:	16327061