Jurij Gostiša (Avtor), Primož Drešar (Avtor), Marko Hočevar (Avtor), Matevž Dular (Avtor)

Povzetek

The research on the potential of cavitation exploitation is currently an extremely interesting topic. To reduce the costs and time of the cavitation reactor optimization, nowadays, experimental optimization is supplemented and even replaced using computational fluid dynamics (CFD). One of the approaches towards sustainable water treatment is the use of the cavitation reactor with bluff elements mounted on its stator and rotor. The experimental results show that, besides the rotational speed, the spacing of the rotor pins has the most significant effect on the cavitation intensity and effectiveness, while the pin diameter and the surface roughness are less significant design parameters. The present paper uses a simplified CFD approach to investigate the conditions in the reactor and to select the optimal among a number of geometry variations.

Ključne besede

kavitacija;računalniška dinamika tekočin;numerične simulacije;generatorji hidrodinamske kavitacije;cavitation;computational fluid dynamics;numerical simulation;hydrodynamic cavitation generators;

Podatki

Jezik: Angleški jezik
Leto izida:
Tipologija: 1.01 - Izvirni znanstveni članek
Organizacija: UL FS - Fakulteta za strojništvo
UDK: 532:519.2
COBISS: 117661955 Povezava se bo odprla v novem oknu
ISSN: 1939-019X
Št. ogledov: 67
Št. prenosov: 18
Ocena: 0 (0 glasov)
Metapodatki: JSON JSON-RDF JSON-LD TURTLE N-TRIPLES XML RDFA MICRODATA DC-XML DC-RDF RDF

Ostali podatki

Sekundarni jezik: Slovenski jezik
Sekundarne ključne besede: kavitacija;računalniška dinamika tekočin;numerične simulacije;generatorji hidrodinamske kavitacije;
Vrsta dela (COBISS): Članek v reviji
Strani: str. 3502-3516
Letnik: ǂVol. ǂ100
Zvezek: ǂiss. ǂ12
Čas izdaje: Dec. 2022
DOI: 10.1002/cjce.24572
ID: 17351939